Smeg STX3CL Bedienungsanleitung
Smeg
Spülmaschine
STX3CL
Lies die bedienungsanleitung für Smeg STX3CL (16 Seiten) kostenlos online; sie gehört zur Kategorie Spülmaschine. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 3.5 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu Smeg STX3CL oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/16

Contents
1
1. Description of the controls _______________________________ 2
2. Operating instructions __________________________________ 16
3. Cleaning and maintenance ______________________________ 31
4. Troubleshooting ______________________________________ 35
Thank you for choosing one of our products.
You are advised to read this manual carefully; it contains all the
information you need use your dishwasher safely, correctly and in the
most satisfactory manner.
Following the cleaning instructions provided here will keep your
dishwasher's performance at peak levels in the long term.
USER INSTRUCTIONS: these consist of recommendations for using the
appliance, a description of its controls and of the correct cleaning and
maintenance procedures.

User instructions
3
6 PROGRAM DELAY BUTTON
Press this button to delay the start of the program.
7 INFORMATION DISPLAY (1 or 3 digits depending on model)
8 OPTIONS (on some models only)
9 CHILD SAFETY DEVICE (on some models only)
Information displayed
no Scheduled program
duration
yes
no Remaining program
time
yes
1 - 9 hours Delayed start 1 - 24 hours
E
Error message
Err
<<OPTIONS(8)>>
Depending on the model, this zone may contain one or more of the
following options, identied by the relative symbols and described in more
detail in the relevant sections of the manual.
It is not possible to select any options when the soak program is being
used. All options except "Flexi Tabs" are disabled at the end of the wash
cycle. To disable the “Flexi Tabs” option, press the relative button (the
light goes out).

User instructions
10
NOTES AND REFERENCES
Only
run the soak program with half loads.
Options cannot be used with the soak program.
The ENERSAVE option cannot be used with soak, ultra clean, or any programs
which do not include the nal drying stage.
* Standard programme under
EN 50242
. The
ENERSAVE
option must
be
enabled.
** See information sheet provided
***
IEC/DIN
reference programme. The
ENERSAVE
option must
be enabled
.
**** Reference program for laboratories: Detergent:
20g
in the
dispenser
+
10g
in
the door or tablet. Configuration: see photo in “Using the baskets”.
(1) Program consumption and duration gures have been measured in accordance
with the EN 50242 standard. Values may vary depending on intake water and
room temperatures and the type and quantity of dishes loaded.
(2) 1 or 2 cold rinses depending on the model.
REFERENCES for the ENERGY LABEL supplied with the dishwasher:
- Annual energy consumption is based on 280 standard wash cycles with cold
water and consumption of low-energy operating modes. Actual consumption
depends on the way in which the appliance is used.
- Water consumption is based on 280 standard wash cycles. Actual
consumption depends on the way in which the appliance is used.
- Information refers to the EN 50242 STANDARD programme (identied in the
programmes table), which is the most eective in terms of combined energy
and water consumption. The programme is recommended for dishes with a
normal level of dirt.
- Drying eciency class on a scale from “G” (minimum efciency) to “A”
(maximum efciency).
Produktspezifikationen
Marke: | Smeg |
Kategorie: | Spülmaschine |
Modell: | STX3CL |
Breite: | 598 mm |
Tiefe: | 570 mm |
Steuerung: | Tasten |
Höhe: | 818 mm |
Eingebautes Display: | Ja |
Geräteplatzierung: | Voll integriert |
Startzeitvorwahl: | Ja |
Energieeffizienzklasse (alt): | A+++ |
Verstellbare Füße: | Ja |
Geräuschpegel: | 44 dB |
Türfarbe: | Nicht zutreffend |
Einschalteverzögerung (max.): | 24 h |
Wasserverbrauch pro Zyklus: | 9 l |
Anzahl Waschprogramme: | 10 |
Energieverbrauch pro Zyklus: | - kWh |
Anzahl Maßgedecke: | 13 Maßgedecke |
Geschirrspülprogramme: | Auto, Auto 45-65°C, Eco, Glass/delicate, Quick |
Aquastop Funktion: | Ja |
Temperatur (max): | 70 °C |
Bedienfeld Farbe: | Edelstahl |
Oberer Korb höhenverstellbar: | Ja |
Einbauraum Breite: | 600 mm |
Einbauraum Tiefe: | 575 mm |
Anzeige bei geringem Füllstand an Salz: | Ja |
Anzeige für fehlenden Klarspüler: | Ja |
Einbauraum Höhe (min): | 820 mm |
Integrierter Timer: | Ja |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Smeg STX3CL benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Spülmaschine Smeg
17 Juli 2025
17 Juli 2025
17 Juli 2025
11 Juli 2025
10 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
8 Juli 2025
8 Juli 2025
Bedienungsanleitung Spülmaschine
- Essentiel B
- Edgestar
- Matrix
- Bertazzoni
- Rex
- Master Kitchen
- Dacor
- Limit
- Vivax
- Moulinex
- WEG
- Wolkenstein
- Porter & Charles
- Klarstein
- Rosières
Neueste Bedienungsanleitung für -Kategorien-
31 Juli 2025
31 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025