SolarEdge Home Battery Bedienungsanleitung

Lies die bedienungsanleitung für SolarEdge Home Battery (2 Seiten) kostenlos online; sie gehört zur Kategorie Akku. Dieses Handbuch wurde von 48 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 5 Bewertungen. Hast du eine Frage zu SolarEdge Home Battery oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

What’s in the Package

Installation and

Operation Guide

Version v. 1.5

SolarEdge

HomeBattery (HighVoltage)

for use with SolarEdge inverters

North America and Australia

© SolarEdge Technologies, Ltd.

All rightsreserved.

Version:1.5,March 2022

Subjecttochangewithoutnotice.

SolarEdge Home

Battery

Mounting bracket

Decorative cover

Required Personnel and Tools

WARNING!

Before installingoroperatingthe SolarEdge Home Battery (referred to as the “Battery”), read the Safety and Handling

instructions at the back of this page.

x 2

Cover

screws

Dolly with lift

and ratchet straps

Drill

Mounting

screws-

max M10

min 2

Min 2 qualified

installers

MC4

crimper

Level

Handles (available

from SolarEdge)

x 4

DC cable

600V insulated

Branch connectors

(optional, available

from SolarEdge)

x 2

Torque

wrench

Phillips

screwdriver

x 2

Mounting

bracket screws

MC4

connectors

SupportContactInformation

Incase ofanytechnicalissues with SolarEdge

products,pleasecontactus at:

https://www.solaredge.com/service/support

Conduit

holder

SolarEdge

Home Network

plug-in (available

from SolarEdge)

4

2

3

Hang battery on

mounting bracket

1.Lift the battery to the height of the mounting bracket.

2.Hang the battery on the mounting bracket, while

holdingit bythe handles.

3.Secure with a mounting bracket screw (supplied) on

eachside. Applya torque of 42in-lbs/4.7N*m.

1

2

4

5

Prepare cables

1.Mount the conduit holder.

2.Pass the DC cables and grounding cable through the

conduit holder at the bottom of the battery.

3.Connect the grounding cable to the grounding terminal

with a torque of 66in*lbs/7.5 N*m.

4.Crimp the DC cables to the MC4 connectors (supplied)

and tighten the MC4connectorglands with a torque of

30 in*lbs/3.4N*m.

3

1

Connect to inverter

1.Make sure the inverter is OFF.

2.Connect the DC cables to the DC+ and DC-inputs.

Observe correct polarity.

3.Install the SolarEdge

Home Networkplug-in and antenna

in the inverter.

See theinstallation guide:

4.Connect cables to the inverter.

See the

Connection and Configuration

application note.

-

+

2

6

3

Home Network

OFF

4

1

WARNING!

Thissymbol on the product or in the accompanyingdocumentationdenotesahazard. It callsattention to aprocedure

that, if not correctly performed or adhered to, could result in injury or loss of life. Do not proceed beyond a warning

note untiltheindicatedconditionsare fullyunderstood and met.

Install mounting bracket

1.Level the bracket.

2.Mark two drilling spots.

Use either the inner or outer pair of holes.

If necessary, you can use the additionalholes to secure

the bracket.

3.Drill holes in the installation surface.

4.Install the mounting bracket and secure with screws.

When selecting the installation location:

•Maintain a clearance of min 8 in/20 cm from other objects.

•Make sure the max distance from the inverter is max

164 ft/50 m.

Make sure the installation surface sustains the weight of the

battery (267lbs/121kg).

16”/ 40.5 cm

24”/ 61 cm

2

3

4

2

1

min8 in/20cm

max 164 ft/50 m

For the SolarEdge Home Battery –Emergency

Response guide, including emergency phone

numbers,scanthe QRcode:

Fire

extinguisher

Transport battery

1.Screw in all FOUR handles to the battery frame.

2.Place the battery upright on a dolly and secure it with

straps.

Caution!

Stand the battery on the rubber protector only!

3.Transport the battery to the installation location.

;

1

2

3

3

CAUTION!

Make sure to screw in the handles all the way.

Do not use a bent, cracked, or otherwise damaged handle.

Install fire extinguisher

Long-nose

pliers

1

1

2

3

3

14

1.Use long-nose pliers to straighten and remove the

safety pin.

2.Remove the sticker that covers the fire extinguisher’s

service hole.

3.Carefully insert the fire extinguisher into the service

hole.

4.Secure the fire extinguisher with seven Allen screws

(supplied).Applya torque of 40in-lbs/4.5N*m.

Produktspezifikationen