Sonance Sonamp DSP 8-130 MKIII Bedienungsanleitung
Lies die bedienungsanleitung für Sonance Sonamp DSP 8-130 MKIII (19 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 2 Bewertungen. Hast du eine Frage zu Sonance Sonamp DSP 8-130 MKIII oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/19
I N S TA L L AT I O N A N D S U P P O R T M A N UAL
2
DSP 8-130 MKIII
1R
2R
3R
4R
1L
2L
3L
4L
MULTI-CHANNEL POWER AMPLIFIER
DSP 8-130 MKIII AMPLIFIER
TABLE OF CONTENTS
2 Box Contents
2 Introduction
2 Important Safety Information
3 Product Description
3 Placement
3 Unpacking and Record Keeping
4 Front and Rear Panel Features
5 Power the Amplier
6 Speaker Connections
6 Bridging Channels
7 Volume Level Control
7 Protecting Circuitry, LEDs, and Speakers
8 Rack Ear Installation
8 Amplier Stacking
8 Sonarc SetUp
15 Specications
16 Appendix A and B
17 Troubleshooting
19 Warranty Statement
FRONT VIEW
BACK VIEW
BOX CONTENTS
(1) Quickstart Guide
(1) Network Connection Instructions
(1) Sonance DSP 8-130 MKIII Amplier
(1) IEC Power Cord
(4) Removable Amp Feet
(2) Rack Ears
INTRODUCTION
Thank you for selecting the Sonance DSP 8-130 MKIII
amplier. Sonance has over three decades of experience
in premium distributed audio amplication. The
amplier has been precision engineered to provide
maximum installation exibility, low energy consumption
and audiophile sound in a compact form factor (1RU).
Please take the time to carefully read through the
manual, study the illustrations and system diagrams.
This extra time can lead to trouble free operation and
continued musical enjoyment.
READ THIS SECTION IN ITS ENTIRETY BEFORE
ATTEMPTING USE OF THIS AMPLIFIER
IMPORTANT SAFETY INSTRUCTIONS
ALWAYS FOLLOW THESE BASIC SAFETY PRECAUTIONS
WHEN USING YOUR AMP TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK, AND INJURY TO PEOPLE OR
OBJECTS.
1. Read all the safety and operating instructions before
operating the amplier and retain them for future
reference.
2. Adhere to all warnings and precautions listed on the
amplier and in the operating instructions.
3. Follow all operating instructions.
4. Never use the amplier next to water.
5. Use only with a cart or stand that is recommended
by the manufacturer. Move with care.
6. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT
USE THE POLARIZED PLUG WITH AN EXTENSION
CORD, RECEPTACLE, OR OTHER OUTLETS UNLESS
THE BLADES CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE.
7. Ventilation: situate the amplier so that its location
does not interfere with its proper ventilation.
8. Heat: situate the amplier away from heat sources
such as radiators, stoves, etc. (including ampliers).
9. Grounding or Polarization: take precautions so that
these attributes are not defeated.
10. Power-Cord Protection: route power supply cords so
they will not be walked on or pinched by items.
11. Cleaning: use ‘canned air’ or wipe the amplier with
a soft cloth. Do not use solvents, as they may damage
the amplier.
12. Non-Use Periods: unplug the amplier’s power cord
from the outlet when the amplier will be left un-
used for a long period of time.
13. Object Entry: take care so that objects do not fall
through the opening of the enclosure.
14. Moisture: do not expose the amplier to dripping or
splashing. Do not place objects lled with liquids (ex.
vases, drinking glasses) on the amplier.
3
15. Damage Requiring Service: have the amplier
serviced by a qualied service technician when the
power cord or power supply is damaged, dropped,
the enclosure is damaged, something has spilled
into the amplier, it has been exposed to rain, or the
amplier is not operating properly.
16. Servicing: do not attempt to self service the amplier.
Contact Sonance Tech Support for servicing options.
17. Power Requirement: do not connect the Sonance
amplier to the accessory outlet of any other
component. Connection to a grounded mains power
outlet is required.
WARNING: THE POWER MAINS PLUG SERVES AS THE
AMPLIFIER’S DISCONNECT DEVICE. THE DISCONNECT
DEVICE SHALL REMAIN READILY OPERABLE DURING
OPERATION. TO ENSURE THAT THE DISCONNECT
DEVICE IS EASILY ACCESSIBLE, THE USER SHALL NOT
PLACE THE AMPLIFIER IN A CONFINED AREA DURING
OPERATION.
18. Storms: to prevent damage to components, unplug
all electronic equipment during thunderstorms.
19. Unplug by grasping the plug; do not pull on the cord.
WARNING: ANY CHANGES OR MODIFICATIONS TO
THIS UNIT NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
NOTE: THIS EQUIPMENT HAS BEEN TESTED AND
FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B
DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC
RULES. THESE LIMITS ARE DESIGNED TO PROVIDE
REASONABLE PROTECTION AGAINST HARMFUL
INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS
EQUIPMENT GENERATES, USES, AND CAN RADIATE
RADIO FREQUENCY ENERGY AND IF NOT INSTALLED
AND USED IN ACCORDANCE WITH THE INSTRUCTIONS,
MAY CAUSE HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS. THERE IS NO GUARANTEE THAT
INTERFERENCE WILL NOT OCCUR IN A PARTICULAR
INSTALLATION. IF THIS EQUIPMENT DOES CAUSE
HARMFUL INTERFERENCE TO RADIO OR TELEVISION
RECEPTION, WHICH CAN BE DETERMINED BY
TURNING THE EQUIPMENT OFF AND ON, THE
USER IS ENCOURAGED TO TRY TO CORRECT THE
INTERFERENCE BY ONE OR MORE OF THE FOLLOWING
MEASURES:
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected
• Consult the dealer or technician for help
• Reorient or relocate the receiving antenna
• Increase distance between the equipment and
receiver
PRODUCT DESCRIPTION
The DSP 8-130 MKIII combines the powerful equalization
of Sonance’s DSP ampliers with unparalleled ease
of use. Through the back panel preset interface, most
Sonance loudspeakers can have a custom equalization
curve applied. When additional customization is
required, the SonARC V2 interface can be accessed
through the ethernet port.
The amplier is rated at 150W per channel into 8 ohm
loads, 245W per channel into 4 ohm loads and 475W per
bridged pair of channels into 8 ohm loads. The internal
stereo amplier modules are audiophile grade, high-
efciency Class D. The amplier is congurable for stereo
(4 or 8 ohm speakers) and/or bridged operation (8 ohm
speakers only). Bridged operation is useful for higher
power output applications such as driving a passive
subwoofer or an outdoor 8 ohm satellite and subwoofer
system. Audio source connections can be made into the
RCA inputs or the Coaxial or Optical Digital Inputs. The
DSP 8-130 MKIII has a comprehensive protection circuit
that guards against shorted outputs, over-current, over-
temperature, low AC voltage (brownouts) and excessive
AC voltage.
PLACEMENT
The DSP 8-130 MKIII features fan-assisted cooling
utilizing vents on both sides of the chassis. Ensure the
sides of the amplier have a least 3” (75mm) of clearance
to the sides of the rack or equipment cabinet to allow
for proper air ow. The amplier should be placed in
a dry, non-condensing environment with ventilation.
Locate the amplier so it is completely isolated from
temperature extremes, rain, snow, direct sunlight, and
atmospheric contaminants. Do not locate the amplier
outdoors. Any moisture related damage (such as from
condensation) is not covered by the factory warranty.
The amplier includes fan-assisted cooling, some heat
is still produced. Locate the amplier on a shelf or at
the lowest place in a rack that has good circulation of
fresh air to dissipate heat. Do not place the amplier in a
closed cabinet or closet with little ventilation as this can
reduce its service life.
UNPACKING AND RECORD KEEPING
Save the carton and packing inserts for future safe
transport in case the amplier is moved or requires
shipping for repair. Before proceeding with installation,
locate the serial number on the rear panel of the unit
and note it here for future reference:
S/N:_____________________________________________
Date of Sale:______________________________________
Dealer Name:_____________________________________
Contact Info:______________________________________
Produktspezifikationen
| Marke: | Sonance |
| Kategorie: | Empfänger |
| Modell: | Sonamp DSP 8-130 MKIII |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sonance Sonamp DSP 8-130 MKIII benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Empfänger Sonance
15 Juni 2025
15 Juni 2025
4 August 2024
31 Juli 2024
27 Juli 2024
21 Juli 2024
6 April 2024
13 September 2023
20 Oktober 2022
Bedienungsanleitung Empfänger
- Linn
- Pioneer
- FoneStar
- Siig
- FiveO
- GoGEN
- Hilti
- Boss
- Roswell
- Intertechno
- AudioControl
- Ibanez
- CE Labs
- Radial Engineering
- Homecast
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025