Sony Optiarc AD-7910A Bedienungsanleitung

Sony Optiarc DVD-Recorder AD-7910A

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sony Optiarc AD-7910A (4 Seiten) in der Kategorie DVD-Recorder. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 6.5 Benutzern mit durchschnittlich 4.9 Sternen bewertet

Download PDF

Seite 1/4

Instructions

1 Front Panel

This panel prevents dust from

entering the DVD Writer and

opens automatically only

a little when the Eject button

is pushed.

2 Busy Indicator

This indicator lights during

data read and write operation.

3 Eject Button

This button is pressed to open

the disc tray/eject the disc

when the power is on.

4 Emergency Eject Hole*

Use to remove the disc from

the DVD Writer if the

electrical eject is disabled by

software or if power failure

occurs. (see „Emergency Eject“

for details)

Front View AD-5590, AD-759x

Internal ATAPI Drive Slimline DVD Writer

Names and Functions

3 4

English

CLASS 1 LASER PRODUCT

LASER KLASSE 1

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

Laser Safety Information

This drive employs a laser.

Do not remove the cover or attempt

to service this device when

connected due to the possibility of

eye damage.

CAUTION

The use of controls or adjustments

or performance of procedures other

than those specified herein may

result in hazardous radiation

exposure.

Laser Specification:

Semiconductor Laser: 330mW, 785nm;

280mW, 661nm

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the EU

and other European

countries with separate

collection systems)

This symbol on the

product or on its

packaging indicates

that this product shall not be treated

as household waste. Instead it shall

be handed over to the applicable

collection point for the recycling of

electrical and electronic equipment.

By ensuring this product is disposed

of correctly, you will help prevent

potential negative consequences for

the environment and human health,

which could otherwise be caused by

inappropriate waste handling of this

product. The recycling of materials

will help to conserve natural

resources. For more detailed

information about recycling of this

product, please contact your local

Civic Office, your

household waste

disposal service

or the shop where

you purchased

the product.

Front View AD-763xA, AD-767xS (slot-in)

Instructions

3.Connect the intended plug

with the socket on the back

of the Slimline DVD Writer.

4.Slide the Slimline DVD Writer

into the computer and fix it

in the computer cabinet with

4 screws.

To avoid damage to the DVD

Writer take care that the screws

do not reach more than 1.5 mm

into the Optiarc Writers cabinet.

5.Reassemble the computer and

close the housing cover. Refer

to the operation gudie that

came with the computer for

help with this step.

Drive usage

Inserting a Disc

1. Press the Eject button. The disc

tray will be ejected by about

10mm.

2. Pull the disc tray all the way

open by hand.

3.Set the disc into the shaft in

the centre of the tray with

the label side facing up.

4.Press the disc tray into the

DVD Writer calmly by hand.

Removing a Disc

1. Press the Eject button. The disc

tray will be ejected by about

10mm.

2.Pull the disc tray all the way

open by hand.

3. Lift the edge of the disc

strongly, pressing the shaft in

the centre of the tray.

4. Press the disc tray into the

DVD Writer drive calmly

by hand.

Note: If an eject prohibit

command has been received

from the computer, the disc

tray will not be ejected even if

the Eject button is pressed.

5 Connector

This Connector includes Power

and I/O BUS.

Installation

Configuration

The drive configures itself

independently through

the connector.

Note: Not all computer hardware

supports the intended automatic

configuration. Usually this

causes that after the drive

assembled the computer does

not boot any longer. In such

case the drives firmware must

by changed by qualified

personnel.

Installing in a host computer

While installing a slimline drive,

you have to consider that it’s

dimension and connector are

designed for usage in portable

computer and are standardized.

If the Slimline drive is not target

for a standard slimline system,

additional adapters must be

procured from an appropriate

expert trader.

1. Turn off the computer, other

peripherals and unplug all the

cords and cables. Then remove

the computer cover, face plate,

mounting clips, and keeper

bracket. Refer to the operation

gudie that came with your

computer for help with this step.

2. Slide the Slimline DVD Writer

into the computer in such a

way that you are able to

connect the intended plug.

Rear View

Instructions

For Windows 3.xx don’t use the

32 bit hard disk access, because

this mode is not supported for

DVD drives.

If the reading function is availa-

ble the next step is to achieve

the writing function provided by

the writing software. Please

insert your writing software CD-

ROM into the DVD Writer and use

the information provided with

the software (if the installation

does not starting automatically

you have to activate the software

installation manually).

Support

For local support like hotline,

service or firmware updates please

check following Internet site:

http://www.sony-optiarc.eu

Emergency Eject*

The procedure described below

can be used to open the tray of

the Optiarc Writer if the EJECT

button is disabled by software or a

power failure occurs.

1. Turn off the power to the

Slimline DVD Writer.

2. If a disc inside still is spinning

wait until it stops.

3. Insert a steel rod (about 0.8 mm

in diameter) into the emergency

eject hole and push firmly until

the cartridge is ejected. A stiff

paper clip may be used as steel rod.

*) the slot-in drives AD-7630,

AD-733 and AD-7670 do not

have a emergency eject hole

Driver Installation

The software installation starts

with activating the reading func-

tion of the drive (CD-ROM).

If you are using the Slimline DVD

Writer with Windows 95/98/ME/

NT/2000/XP or IBM OS/2 Warp,

all necessary drivers will be

loaded automatically by the

operating system.

Drivers mentioned above are part

of the Operating Systems and are

not available from Sony Optiarc.

To use the IDE/ATAPI Slimline

DVD Writer with MS-DOS and

MS-Windows 3.x, you have to

install the attached driver software

before you can use the Optiarc

Writer for the first time.

Refer to the README.TXT file on

the driver disk for information

about installing this driver.

This drive supports RPC according

to SFF8090v4 (RPC-2). The final

setting/definition of the video

region code is determined by the

fifth DVD video region code change.

20 mm

AD-5590A/S

AD-7590A/S

AD-7591S

AD-7593A/S

AD-7630A, AD-7670S

AD-7633A

Produktspezifikationen

Marke:	Sony Optiarc
Kategorie:	DVD-Recorder
Modell:	AD-7910A
Gewicht:	140 g
Produktfarbe:	Schwarz
Maximale Datenübertragungsrate:	88 Mbit/s
Eingebaut:	Ja
Schnittstelle:	EIDE/ATA
Abmessungen (BxTxH):	128 x 129 x 10 mm
Unterstützte Medientypen:	DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD-RAM, DVD+R, DVD+R9, DVD+RW, DVD-Video, CD-ROM, CD-ROM XA, CDAudio, CD-Extra, CD-Text, CD-I Ready, CD-Bridge, Photo-CD, Video-CD, Hybrid-CD
Optisches Laufwerk - Typ:	DVD±R/RW
Lademechanismus:	Ablage
Lesegeschwindigkeit CD:	24 x
Lesegeschwindigkeit DVD:	8 x
Doppelte Schicht DVD+R - schreiben Geschwindigkeit:	8 x
Doppelte Schicht DVD-R - schreiben Geschwindigkeit:	8 x
Geschwindigkeit schreiben DVD-RAM:	5 x
Geschwindigkeit schreiben DVD+R:	8 x
Geschwindigkeit schreiben DVD-R:	8 x
Geschwindigkeit schreiben DVD-RW:	6 x
Geschwindigkeit schreiben DVD+RW:	8 x
Laufwerk, Puffergröße:	5 MB
CD-Rewrite Geschwindigkeit:	16 x
Durchmesser optische Disk:	120 mm
Schreibgeschwindigkeit CD:	24 x
DVD Laufwerk Durchschnitt Direktzugriff-Zeit:	180 ms
CD-ROM Laufwerk Durchschnitt Direktzugriff-Zeit:	150 ms
Disc-at-Once (DAO):	Ja
Session-at-Once (SAO):	Ja
Track-at-Once (TAO):	Ja
Multisitzung:	Ja
Festes Paket:	Ja
Variables Paket:	Ja