Soundcore R50i Bedienungsanleitung

Soundcore Kopfhörer R50i

Lies die bedienungsanleitung für Soundcore R50i (3 Seiten) kostenlos online; sie gehört zur Kategorie Kopfhörer. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Soundcore R50i oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/3

APP

Download the soundcore app to experience the full range of features such as gaming mode, Find Device, EQ tuning, ﬁrmware updates, and more.

If your earbuds cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store.

Click this link to download: http://dl-soundcore.soundcore.com/qcdl?ﬂow=soundcore

WEARING

Choose the ear tips that ﬁt your ears best.

CHARGING

• Fully dry off the earbuds and the USB-C charging port before charging.

• Fully charge both the earbuds and the charging case before the ﬁrst use.

1. Tear off the insulation sticker on the earbuds before ﬁrst use.

2. Place the earbuds in the charging case and close it.

3. Connect the charging case to the power supply by using a certiﬁed USB-C charging cable.

POWERING ON & PAIRING

Open the charging case and take the earbuds out of the case. They will automatically power on and enter Bluetooth pairing mode.

Select soundcore R50i / P20i / P25i * on your device's Bluetooth list when connecting for the ﬁrst time soundcore.

*The device name may vary depending on the region.

MANUAL PAIRING

To manually enter Bluetooth pairing mode, take the earbuds out of the case, then tap and hold the touchpads on both earbuds for 3 seconds.

CONTROLS

*You can also customize controls in the soundcore app.

TWS mode Mono mode

Play / Pause Tap twice (R) Tap twice

Previous track Tap and hold for 2 seconds (L) /

Next track Tap and hold for 2 seconds (R) /

Answer / End a call Tap twice (L/R) Tap twice

Reject a call Tap and hold for 2 seconds (L/R) Tap and hold for 2 seconds

Activate voice assistant software Tap twice (L) /

POWERING OFF

To power off, return the earbuds to the charging case and close it.

The earbuds will automatically power off after 30 minutes if they are not connected.

RESET

Reset if the earbuds have issues pairing with each other or with other devices.

Delete the pairing history from your Bluetooth device ﬁrst. Take the earbuds out of the case. Within one minute of the earbuds powering on, tap and hold the

touchpads on both earbuds for 10 seconds until you hear a notiﬁcation sound.

LED LIGHT GUIDE

FIRMWARE UPDATE

You will be informed once a new ﬁrmware version is detected when you connect the earbuds to the app. Ensure the earbuds are placed in the charging case

and the case remains open until the ﬁrmware update is complete. During the update, ensure the earbuds are being charged and avoid any usage.

Speciﬁcations are subject to change without notice.

Input 5V 0.43A

Rated output power 5mW

Battery capacity

60mAh × 2 (earbuds);

430mAh (charging case)

Charging time Up to 2 hours

Playtime (varies by volume

level and content)

Up to 10 hours (up to 30 hours with the charging case)

Driver unit 10mm dynamic driver

Frequency response 20Hz-20KHz

Impedance 16Ω

Waterproof level (Earbuds) IPX5

Bluetooth version 5.3

Bluetooth range 10m / 33ft

Customer Service

service@soundcore.com

support.mea@soundcore.com (For Middle East and Africa Only)

support@anker.com (

)

+1 (800) 988 7973 (US/Canada)

+44 (0) 1604 936200 (UK)

+49 (0) 69 9579 7960 (DE)

03 4455 7823 (

)

+86 400 0550 036 (

)

+82 02-1661-9246 (

)

+971 529750842 (Middle East & Africa)

+971 8000320817 (UAE)

+966 8008500030 (KSA)

+965 22069086 (Kuwait)

+20 8000000826 (Egypt)

+61 3 8331 4800 (Australia)

+90 (850) 460 14 14 (Türkiye)

+8 (800) 511-86-23 (Russia)

+91 18003138831 (India)

Note: The 'x' of SN Code: xxxxxxxxxxxxxxxx is a variable, see below table.

Variable 'x' Range of variable Content

Eighth 8,9,A,B,C...

Denotes the year, 8 means 2018, 9 means

2019, A means 2020, B means 2021, C

means 2022, and so on.

Ninth and tenth 01,02,03...

Denotes weeks, 01 means the first week in

this year, 02 means the secondary week in

this year, and so on.

Eleventh 1-7

Denotes date, 1 means Monday, 2 means

Tuesday..., 7 means Sunday and so on.

The last five 00001-99999 Denotes serial No.

Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security