SoundPEATS T3 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr SoundPEATS T3 (7 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂŒr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
1
English
First Time of Using
1. Open the cover of the charging case, take out the two earphones, remove
the insulation lm on them separately, and then put both earphones back
into the charging case. By this time, the le and right earphones will
automatically enter the TWS mutual pairing state. Aer successful mutual
pairing, the blue light in the right earphone will ash slowly and the blue light
in the le earphone will always be on, and the two earphones will enter the
2. Then go to Bluetooth settings of your device, and choose SOUNDPEATS T3.
SOUNDPEATS T3
Connected
2
Reset
Wearing methods
English
1.Clear the pairing data from your device.
2. Take out the two earphones from the charging
case, press and hold the multifunctional buttons
for 10s until the blue indicator lights in both
earphones ash for three times and then go out.
At this time, the earphones are o, and then
press and hold the multifunctional buttons of
both earphones again for 10S until the blue
indicator lights ash twice, and the reset is
completed.
3. Place the earbuds back into the charging case
and close the case lid, waiting for seconds, and
then open it again. The earphones are
activated successfully.
1. Identify the le earphone and the right earphone.
2. Adjust the earphones to t your ears.
English
3
Product Diagram
1.5s 1.5s3x 2x 1x 3x2x1x


Produktspezifikationen

Marke: SoundPEATS
Kategorie: Nicht kategorisiert
Modell: T3

Brauchst du Hilfe?

Wenn Sie Hilfe mit SoundPEATS T3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert SoundPEATS

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂŒr -Kategorien-