Soundskins SSK-WAVYPLUS Bedienungsanleitung


Lies die bedienungsanleitung für Soundskins SSK-WAVYPLUS (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 2 Bewertungen. Hast du eine Frage zu Soundskins SSK-WAVYPLUS oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
Foam Tape
installation
instructions
Alcohol based cleaner
& microfiber towel
Sharp blade or
scissors
Roller
R
Start by getting all metal surfaces clean from dust, oil, wax and moisture.
We recommend using a microfiber cloth and an alcohol based cleaning
solution such as denatured alcohol or Invisible Glass. If you have rust, it may
require a bit more attention to ensure the material will stick well. Once all the
surfaces have been prepped and air dried, you can start applying the
material.
Installation
Remove a small section of the backing paper from the foam tape and tack
it into place of the area you would like to cover.
Then, cut the strip to your required size and remove the remainder of the
backing paper.
Last, press or wrap the adhesive side of the foam tape firmly into place, and
repeat this process as needed.
If you have any questions, don’t hesitate to contact us using the information
provided below.
SoundSkins Global USA
(877)211-5597
usa@SoundSkinsGlobal.com
www.SoundSkinsGlobal.com
®2024 SoundSkins Global, All Rights Reserved
@soundskinsglobal
All required tools


Produktspezifikationen

Marke: Soundskins
Kategorie: Nicht kategorisiert
Modell: SSK-WAVYPLUS

Brauchst du Hilfe?

Wenn Sie Hilfe mit Soundskins SSK-WAVYPLUS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten