Speakman SE-880 Bedienungsanleitung

Lies die bedienungsanleitung für Speakman SE-880 (1 Seiten) kostenlos online; sie gehört zur Kategorie Duschkopf und Zubehör. Dieses Handbuch wurde von 7 Personen als hilfreich bewertet. Hast du eine Frage zu Speakman SE-880 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

/ 1 PDF

SPEAKMAN COMPANY

SE-880 Installation, Maintenance & Operation Instructions

Emergency Deluge Shower Head

DESCRIPTION

Emergency deluge shower head with impeller faceplate.

SPECIFICATIONS

SHANK: 8” Dia. Stainless Steel.

SPRAYFACE: Gray ABS Plastic.

SCREWS: #10-24 x 1/2” Flat Head.

INLET: 1” NPT Female.

SHIPPING WEIGHT: 2 lb.

INSTALLATION

When assembling use wrench on hex (flats) only. Be sure and use pipe sealant on threaded connection. Failure to use potable

water supply with emergency safety equipment can result in emergency units producing impure or contaminated water causing

possible further injury.

TESTING PROGRAM

The American National Standards Institute (ANSI) states that all safety emergency equipment shall be activated on a weekly

basis to flush the line and verify proper operation. Speakman Company furnishes a testing record tag

(91-0635) with each unit. On this tag the date of inspection and the inspectors initials should be noted.

MAINTENANCE

Note: All units meet existing

ANSI Z358.1 2004 Standards

and OSHA Rules. Product

improvements may cause

specification and dimensional

changes without notice.

Should you need parts to repair this unit, please

reference the parts listing below for correct part

numbers. Before any maintenance is done be sure the

water supply is off.

WARNING: Use only genuine Speakman parts

when repairing or replacing components. To order

parts call 1-800-537-2107.

SE-880 REPLACEMENT/REPAIR PARTS

ITEMPART/GROUP #DESCRIPTION

1 38-0244-SS-P 8” S/S Shank

2 38-0226-PNT Gray Face

Plate

3 48-0310-SS-P (3) Screw for

S/S Shank

NOTE: This unit should be connected to an

uninterrupted source of potable water, with a minimum

flowing pressure of 20 PSI and a maximum static

pressure of 125 PSI.

10/05

92-1522

Rev-3

Produktspezifikationen