Speco Technologies TVIGL Bedienungsanleitung

Lies die bedienungsanleitung für Speco Technologies TVIGL (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 50 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 8 Bewertungen. Hast du eine Frage zu Speco Technologies TVIGL oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1

TVIGL Passive HD-TVI/ADH/HD-CVI Ground Loop Isolator

Thank you for your purchase of the TVIGL video ground loop isolator. This unit is designed for eliminating ground loop issues

with high-definition cameras and can easily install in a new or existing system where a video signal is transmitted via one cable

between two points with different ground potentials. Differences in ground potentials are typically caused by unbalanced

power load lines.

FEATURES

•IMPORTANT: The TVIGL does not support UTC function. Please make any adjustments between camera and

recorder prior to installation of the TVIGL. UTC commands WILL NOT work after this has been installed.

•Prevents video- signal distortion caused by video ground loops.

•Prevents power cables from interfering with the HD camera signal.

•Eliminates picture tearing, cross- talk and rolling.

•BNC male to BNC female with a 6” cable on each side.

•Passive, no power required.

•Supports resolutions up to 4K.

•Bandwidth: 25HZ to 50MHz (- 3dB)

•Maximum distance: 7874’ (200M)

INSTALLATION VIEW

SPECIFICATIONS

Frequency Response

25Hz ~ 50MHz (0～3dB)

Coaxial Input/Output

Resistance

75 Ohms

Ground Isolation

>90dB @ >50Hz

Isolation Voltage

500VAC / 600VDC

Insulation Resistance

>1M Ohm

CMRR

> 60dB

Dimensions

2.91.11” x x with 6” x 2 Cable

Weight

3 oz.

Speco Technologies is constantly developing and improving products.

We reserve the right to modify product design and specifications without notice and without incurring any obligation.

Speco Technologies . 200 New Highway . Amityville . NY . 11701 . www.specotech.com

Rev. 12/08/20

Produktspezifikationen