Speco Technologies VL644T Bedienungsanleitung

Lies die bedienungsanleitung für Speco Technologies VL644T (2 Seiten) kostenlos online; sie gehört zur Kategorie Überwachungskamera. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 2 Bewertungen. Hast du eine Frage zu Speco Technologies VL644T oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

INSTRUCTION MANUAL

3 Axis 2MP 3.6mm FIXED DOME CAMERA

VL644T

FEATURES

Compact and light weight 3 Axis design

TVI / AHD / CVI / CVBS Video Output Selectable; NTSC / PAL Selectable

Multi Language OSD (On Screen Display) Menu Control via UTC

3D-DNR / 2D-DNR Selectable

Fixed lens built in for easy installation and adjustment

Manual 360 degrees rotation & / tilt mechanism pan

Can be installed on a wall or a ceiling

Video cable with BNC included

PRECAUTIONS

1. Do not attempt to disassemble the camera.

2. To prevent electric shock, do not remove screws or cover. There are no user-serviceable parts inside.

3. Handle the camera with care.

Do not abuse the camera. Avoid striking or shaking it. The camera could be damaged by improper handling or

storage.

4. Never face the camera toward the sun.

5. Use caution when operating the camera in the vicinity of bright lights or light reecting objects.

6. Do not operate the camera beyond its temperature, humidity or power source ratings.

7. Do not use the camera in an extreme environment where high temperature or high humidity exists.

8. Do not touch the sensor directly with your ngers. If necessary, use soft cloth moistened with alcohol to wipe o

the dust.

9. When the camera is not in use, keep the lens cap on to protect the sensor.

INSTALLATION

Remove the dome cover from the mounting base by rotating the dome cover clockwise.

Adjust the camera viewing angle by rst tilting then rotating the camera module. Turn the horizontal adjustment ring to

correct the image and to achieve proper orientation.

Once the installation is complete, replace the dome cover over the camera and tighten it by turning counterclockwise.

Connect the video output to the monitor or other video device through a 75 Ohms type coaxial cable and the DC-Jack to

a 12VDC power source.

Produktspezifikationen