Speco Technologies WAT100D Bedienungsanleitung

Lies die bedienungsanleitung für Speco Technologies WAT100D (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 64 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 7 Bewertungen. Hast du eine Frage zu Speco Technologies WAT100D oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

WAT100D

100W 70/25V Decora Slider Volume Control with 3 Colors

Thank you for your choice of Speco Technologies’ WAT100D volume control. This unit is designed and

manufactured to provide a stylish and high-power alternative to conventional commercial volume controls. For

your convenience and to match many standard decors, 3 color choices for plate and slider knob are included with

this unit.

INSTALLATION INSTRUCTIONS:

1)The WAT100DW. includes 3 color choices: Ivory, hite and Almond

2)BEFORE installing the unit into the wall, select your desired color.

3)Insert the appropriate color slider into the slider plate. To insert, place it vertical inside the cavity and

then twist it in.

4)If the unit already has a slider plate attached to the unit, and you wish to use a different color, simply

press both tabs on one end forward from the rear of the unit at the same time to remove.

5)Slide the black plate on the unit all the way to the top.

6)The slider knob has grooves to align with the ridges on the black plate attached to the control. Make sure

the slider knob is also all the way to the top, and then connect the entire assembly to the volume control.

You can tell if you have aligned the knob correctly if it does not slide down on its own while turning the

entire volume control up and down. There should be the slightest resistance and you can feel the steps of

the volume control.

7)To wire, you should remove the phoenix connector on the back of the unit for easier connection.

Produktspezifikationen