Star Micronics mC-Label3 Bedienungsanleitung
Star Micronics
Etikettendrucker
mC-Label3
Lies die bedienungsanleitung für Star Micronics mC-Label3 (3 Seiten) kostenlos online; sie gehört zur Kategorie Etikettendrucker. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 13.5 Bewertungen. Hast du eine Frage zu Star Micronics mC-Label3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3
Star Windows Software
The Windows driver is included in the Star Windows Software.
The Star Windows Software can be used to congure the printer
settings and perform an operation test.
Download [ Star Windows Software ].
Extract the downloaded software and execute "Setup.exe".
Follow the wizard instructions and complete software installa-
tion.
Windows
Star Quick Setup Utility
For a wired LAN connection, use the tablet that is connected to
the same network as the mC-Label3.
Install [ Star Quick Setup Utility ].
Open the configuration utility, and select [ Start Guide (Initial
Settings)] - [Search Printer].
Follow the instructions of the utility to connect and set up a tab-
let.
iOS/Android
3
Preparing/setting up the conguration app
Conguration app
download site
●Driver download site for Mac / Linux environment. (https://www.star-m.jp/supportsite-wsw.html)
You can complete the settings up to start using the printer from a tablet or PC by using
the conguration app. Scan the QR code on the right side or search the app to access the
download site.
Easy Setup Guide
mC-Label3 online manual
This document explains the setup procedure for the mC-Label3. For
further instructions, please refer to the mC-Label3 online manual. Please
read the instructions before using the printer. You can also see FAQ from
the QR code on the inside of the printer.
Introduction
Easy Setup
GuideLAN Cable
MCL32CI
USB Cables Safety
Instructions
If contents are missing or damaged, please contact the reseller that sold you the printer.
What's Included
Power CableAC Adapter
This Sheet
1
Connecting a Tablet or PC
Connect an appropriate cable to the connector on the printer according to
your operating environment.
USB-C ®
Android, Windows
You will need:
USB cable included with the printer.(C-C)
Windows
You will need:
USB cable included with the printer.(C-A)
Communication and Recharge
2
1
Wired LAN
You will need:
LAN cable included with the printer.
Please remove the protective inside the printer and the silica gel on the part
bottom of the printer.
Before Use
2
1
3
4
5
Securely plug the power cable (for the AC adapter) fully into the AC
adapter inlet ❶.
Connect the AC adapter plug to the power connector of the printer.
Be sure that it is oriented correctly ❷.
Insert the power cable plug into the electrical outlet ❸.
Press the power switch on the side of the printer ❹.
During startup, the lighting and blinking pattern of the Power LED
changes.
Conrm that the Power LED blinks red ❺.
2
Turning ON the Main Unit Power
For the owners of other companies’ trademarks mentioned in this document, see Trademarks in our website (https://www.star-m.jp/eng/trademarks.html).
Copyright 2023 Star Micronics Co., Ltd.
FAQ
80878872
2 1
Plug for the mC-Label3
Communication
Plug for the mC-Label3
Produktspezifikationen
| Marke: | Star Micronics |
| Kategorie: | Etikettendrucker |
| Modell: | mC-Label3 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Star Micronics mC-Label3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Etikettendrucker Star Micronics
26 August 2025
9 Juli 2025
31 August 2024
16 August 2024
16 August 2024
16 August 2024
15 August 2024
13 August 2024
12 August 2024
12 August 2024
Bedienungsanleitung Etikettendrucker
- Niimbot
- JADENS
- Brady
- Brother
- Nieaf-Smitt
- Panduit
- Epson
- Dymo
- Toshiba
- DULA
- 3M
- Qoltec
- Renkforce
- Zebra
- Primera
Neueste Bedienungsanleitung für -Kategorien-
30 Dezember 2026
10 Dezember 2025
9 Dezember 2025
8 Dezember 2025
7 Dezember 2025
6 Dezember 2025
6 Dezember 2025
3 Dezember 2025
3 Dezember 2025
14 November 2025