StarTech.com AP150WN1X1U Bedienungsanleitung
StarTech.com
Zugangspunkt
AP150WN1X1U
Lies die bedienungsanleitung für StarTech.com AP150WN1X1U (2 Seiten) kostenlos online; sie gehört zur Kategorie Zugangspunkt. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 9 Bewertungen. Hast du eine Frage zu StarTech.com AP150WN1X1U oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2

Quick Start Guide
Manual Revision: 01/27/2014
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
I T: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
P T: Guia do usuário - pt.startech.com
Packaging Contents
• 1 x Travel Router
• 1 x USB Cable
• 1 x RJ45 Cable
• 1 x Carrying Pouch
• 1 x Instruction Manu
System Requirements
• Available USB port (or wall charger) for power
AP150WN1X1U
Portable 150Mbps Wireless N Travel Router / Access Point - USB Powered
WPS / Reset Button
WPS
WPS mode is disabled by default because it requires a secured wireless network to be
used.
1. Once you have selected an operating mode and are connected to the
web interface (details in the following sections of this manual), congure
your desired wireless security protocol and key.
LED Indicators
WiFi
O: No Wi-Fi signal
Solid: Wi-Fi signal broadcasting
Flashing: Activity
WLAN
O: No RJ45 connection detected
Solid: RJ45 connection detected
Flashing: Activity
POWER O: No power supplied to the device
Solid: Connected to a USB power source
2. Enable WPS mode.
3. Once enabled, a single press of the button will activate it.
Reset
In order to reset the device to factory defaults:
Note: All previously congured settings will be deleted after performing a reset
1. Ensure the AP is connected to a power source.
2. Press and hold the reset button for 8 seconds, then release.
Installation
Please visit www.startech.com/AP150WN1X1U for full operating instructions and
specications
Default Settings
SSID: AP150WN1X1U
LAN IP Address: 192.168.16.254
Username / Password: admin / admin
Wireless Access Point
In AP mode, the AP150WN1X1U acts as a wireless transmitter which adapts a wired
network signal into WiFi, so that other wireless devices like smartphones and tablets
within range can share the wired connection.
Widely used in: Hotel rooms, school dormitories, etc.
1. Adjust the switch on the device to AP Mode.
2. Connect one end of the included Ethernet cable to the RJ45 port of the AP, and
the other to the hotel wall jack/switch.
3. Connect one end of the included USB cable to the USB port of the AP, and the
other to a USB power source (e.g. laptop, USB wall charger, etc.).
4. Connect your wireless devices to the “AP150WN1X1U” SSID and open your web
browser to access the Internet.
NOTE: If the hotel Internet connection requires a password or has a captive portal
login, contact the front desk to obtain that information.
RJ45 Interface WPS/Reset Button Mode Selector Switch USB Interface
Product Overview
Produktspezifikationen
| Marke: | StarTech.com |
| Kategorie: | Zugangspunkt |
| Modell: | AP150WN1X1U |
Brauchst du Hilfe?
Wenn Sie Hilfe mit StarTech.com AP150WN1X1U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Zugangspunkt StarTech.com
21 August 2024
21 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
19 August 2024
18 August 2024
18 August 2024
18 August 2024
Bedienungsanleitung Zugangspunkt
- Premiertek
- Mikrotik
- Crestron
- Buffalo
- HP
- ZyXEL
- Media-tech
- Eminent
- NUVO
- Cisco
- Macally
- Asus
- Grandstream
- Peplink
- Digitus
Neueste Bedienungsanleitung für -Kategorien-
11 Januar 2026
11 Januar 2026
11 Dezember 2025
11 Dezember 2025
8 Dezember 2025
4 November 2025
1 November 2025
17 Oktober 2025
17 Oktober 2025
12 Oktober 2025