StarTech.com BALBOARD Bedienungsanleitung

Lies die bedienungsanleitung für StarTech.com BALBOARD (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 7 Bewertungen. Hast du eine Frage zu StarTech.com BALBOARD oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Quick-Start Guide

Manual Revision: 06/01/2018

Package Contents

• Balance Board x 1

• Rubber Feet x 4

• Screws x 4

• Washers x 4

• Quick-Start Guide x 1

Warning Statements

Read all warning statements before using the Balance Board.

• The Balance Board, by design, is unstable and may require frequent

user interaction to achieve a balanced stance; as a result, caution

should be exercised when mounting, dismounting and/or using the

Balance Board as personal injury and/or equipment damage can

result from a fall.

• While using the Balance Board, always wear appropriate footwear

(note: running shoes and other at soled shoes are recommended).

• Consult a physician before using the Balance Board.

• Use the Balance Board on a rm, at, dry, and level surface.

• The Balance Board can present a tripping hazard. Always store the

Balance Board in a location with no foot trac.

• Individuals under the age of 18 should be supervised by an adult when

using the Balance Board.

• The Balance Board has a maximum weight capacity of 300 pounds.

Requirements

• Phillips Head Screwdriver x 1

• A at, level surface for use

Installation

1. Align the four Rubber Feet with the predrilled holes.

2. Place one Washer over each of the four Screws.

3. Insert the four Screws (with the attached Washers) into the holes

in each of the Rubber Feet. (gure 1)

4. Fasten the four Screws in place using a Phillips Head Screwdriver.

Note: Do not overtighten the Screws.

Basic Operation

1. Place the Balance Board on a level surface. Or, drag the Balance

Board out from under your desk using the Foot Control Feature

(located along the rear edge of the Balance Board).

2. Find a location on your desk or other stable object where you can

rest your hand to stabilize your body, before attempting to stand

on the Balance Board.

3. Step onto the Balance Board, one foot at a time.

4. Slowly shift your weight towards the centre while engaging all of

your leg, back, and core muscles to facilitate a balanced stance.

SKU #: BALBOARD

Balance Board - for Standing Desk or Sit-Stand Workstation

Advanced Operation

To increase the balancing diculty, you can remove the Rubber

Feet. This will increase the degree of tilt in every direction.

Note: For your own safety, only attempt the Advanced Operation

after you have achieved proper balance during normal Operation.

1. Remove the Rubber Feet using a Phillips Head Screwdriver.

2. Repeat steps 1-5 from the Basic Operation section.

Product Diagram

Bottom View

For the latest information, specications, and support visit www.startech.com/BALBOARD.

Screws

Washers

Rubber

Feet

Spherical

Base

Foot Control

Feature

gure 1

Produktspezifikationen