StarTech.com C6KEY110SWH Bedienungsanleitung


Lies die bedienungsanleitung für StarTech.com C6KEY110SWH (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 7 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 4 Bewertungen. Hast du eine Frage zu StarTech.com C6KEY110SWH oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
Revision: 04/17/2013
For the most up-to-date information, please visit: www.startech.com
C6KEY110SWH
UTP 180 Keystone Jack
1. Strip o 1-inch (2.5cm) of jacket from one end of the
Cat6 cable.
2. Place the wires into the keystone jack, setting the
wire pairs into the IDC according to the displayed
wiring conguration (A or B) and punch down the
connections.
3. Cut excess wire after punching down the wire pairs.
4. Place the cover over the wires.
NOTE:
1. Never install telephone wiring during a lightning storm.
2. Never install telephone wiring in a wet location unless the wiring is specically designed for wet locations.
3. Never touch un-insulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.
4. Use caution when installing or modifying telephone lines.


Produktspezifikationen

Marke: StarTech.com
Kategorie: Nicht kategorisiert
Modell: C6KEY110SWH

Brauchst du Hilfe?

Wenn Sie Hilfe mit StarTech.com C6KEY110SWH benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten