StarTech.com ET90110SM302 Bedienungsanleitung

Lies die bedienungsanleitung für StarTech.com ET90110SM302 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 22 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 7 Bewertungen. Hast du eine Frage zu StarTech.com ET90110SM302 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 06/17/2016

For the most up-to-date information, please visit: www.startech.com

Packaging Contents

• Fiber Media Converter (2 x for ET90110WDM2)

• Universal Power Adapter (2 x for ET90110WDM2)

• Power Adapter Plugs (2 Sets of NA/EU/UK/AU for

ET90110WDM2)

• Grounding Screw

• Instruction Manual

ET90110WDM2 / ET90110SM302

10/100 Mbps Ethernet to Single Mode SC WDM Fiber Media Converter Kit - 20km/30km

System Requirements

• 10BASE-T or 100Base-TX compatible Ethernet network equipment

• RJ45 terminated UTP Cat5 or better Ethernet cable

• 100BASE-FX compatible ber optic network equipment

• SC terminated single mode 9/125 micron (μm) ber optic cable

• Available AC electrical outlet

Installation

1. Make sure the DIP switches are set appropriately for your network

conguration (see “DIP Switch Settings“ section for details).

2. Setup the media converters at each of their respective end

point locations.

3. Connect the ber optic network cable from one media

converter to the other media converter.

4. Connect a UTP Ethernet cable, from a computer/switch to the

RJ45 jack on the media converters at each end point.

5. Connect the included power adapters to the media converters.

6. The following example illustrates the connection scheme

when connecting from a 100BASE-TX Ethernet port on a

hub/switch to a 100BASE-TX Ethernet Network Interface

Card (NIC) in a computer through the ber media converter:

DC Power connector

Ground Point (optional)

Rear View

ET90110WDM2 - Front View

RJ45 Ethernet

connector

SC ber

connector

DIP Switches

LED indicatorsCard Release

Thumbscrew

RJ45 Ethernet

connector

SC Duplex ber

connector

DIP Switches

LED indicatorsCard Release

Thumbscrew

ET90110SM302 - Front View

Produktspezifikationen