StarTech.com EXTEND-HDMI-4K40C6P1 Bedienungsanleitung

Lies die bedienungsanleitung für StarTech.com EXTEND-HDMI-4K40C6P1 (2 Seiten) kostenlos online; sie gehört zur Kategorie AV extender. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 6 Bewertungen. Hast du eine Frage zu StarTech.com EXTEND-HDMI-4K40C6P1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: October 22, 2021 7:09 PM

Product Diagram (EXTEND-HDMI-4K40C6P1)

Transmitter

Receiver

PortFunction

1HDMI Input Port• Connect an HDMI Source Device

2EDID Selector Switch

• TX: Copys EDID data from the display connected

to the HDMI Output Port on the Transmitter

• RX: Copys EDID data from the display connected

to the HDMI Output Port on the Receiver

3

HDMI Output Port

(Transmitter)

• Connect an HDMI Display to the Transmitter

4IR Output Port• Connect the IR Blaster to the Transmitter

5

RJ45 Output Port

(Transmitter)

• Connect to the Receiver, using a CAT5e/6

Ethernet Cable (Sold Separately)

6DC 12V Port

• Power the Transmitter using the Power Adapter

(included)

7

HDMI Output Port

(Receiver)

• Connect an HDMI Display to the Receiver

8IR Input Port• Connect the IR Receiver to the Receiver

9RJ45 Port (Receiver)

• Connect to the Transmitter with a CAT5e/6

Ethernet Cable

HDMI over CAT5e/6 Extender - 4K 30Hz - 130ft (40m)

Requirements

For the latest manuals, product information, technical specications, and declarations of

conformance, please visit:

www.startech.com/EXTEND-HDMI-4K40C6P1

Package Contents

• Local HDMI Transmitter Unit

• Remote HDMI Receiver Unit

• IR Blaster

• IR Receiver

• Power Adapter

• Quick-Start Guide

Installation

Installing the HDMI Transmitter and Receiver

1. Position the Transmitter near the HDMI Source Device.

2. Connect an HDMI Cable (not included) to the HDMI Source Device and to the

HDMI Input Port on the Transmitter.

3. (Optional) Connect an HDMI Cable to the Local HDMI Display and to the HDMI

Output Port on the Transmitter.

4. Connect a CAT5e/6 Cable (not included) to the RJ45 Port on the Transmitter and

to the RJ45 Port on the Receiver.

Note: The cabling cannot go through any networking equipment (e.g. router,

switch, etc.).

5. Position the HDMI Receiver near the HDMI Display Device.

6. Connect an HDMI Cable to the HDMI Output Port on the Receiver and to the HDMI

Display Device.

7. Connect the Universal Power Adapter to the DC 12V Port on the Transmitter to an

AC Electrical Outlet.

Installing the IR Blaster and IR Receiver

Control the HDMI Source Device from the Receiver

1. Connect the IR Blaster (Rounded Shape) to the IR Output Port on the Transmitter.

2. Peel the Film o of the Adhesive Pad that is located on the IR Blaster. Position

the IR Blaster so that it is pointing directly at the IR Sensor on the HDMI Source

Device.

Note: Consult the HDMI Source Device’s manual to determine the location of the IR

Sensor.

123456

78

9

Produktspezifikationen