StarTech.com GNDBAR1U Bedienungsanleitung
Seiten 2 Engels Nicht kategorisiert
Lies die Bedienungsanleitung für StarTech.com GNDBAR1U kostenlos online oder lade das PDF herunter. 18 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
Instruction manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 05/07/2015
For the latest information, technical specications, and support for
this product, please visit www.startech.com/GNDBAR1U.
Packaging contents
• 1 x copper grounding bar (1U or 10U)
• 12 x M5 (20 mm) screws
• 2 x M5 cage nuts
• 1 x instruction manual
System requirements
• A server rack with 1U of free space (horizontal installation) or 10U
of free space (vertical installation)
System requirements are subject to change. For the latest
requirements, please visit www.startech.com/GNDBAR1U.
GNDBAR1U
Copper grounding bar for server racks
*actual product may vary from photos
Product overview
Install the grounding bar
The grounding bar can be installed either horizontally or vertically,
and can be installed on the inside or the outside of your server rack.
Using the holes located along the length of the grounding bar, you
can connect and ground up to ten devices.
1. Decide whether you want to install the grounding bar horizontally
or vertically, and select the area on your server rack where you
want to install the grounding bar.
2. Insert the included M5 cage nuts in the holes in your server rack
that line up with the mounting holes on the end of the grounding
bar.
3. Line up the mounting holes on the end of the grounding bar with
the holes in which you inserted the cage nuts.
4. Holding the grounding bar in place, insert the included M5 (20
mm) screws into the mounting holes located on each end of the
grounding bar.
5. Use a screwdriver to tighten the screws.
6. Attach the devices that you want to ground to the holes located
along the length of the grounding bar.
Note: If you install the grounding bar vertically and inside of the
server rack, the mounting screws used to hold equipment may need
to be replaced with the provided M5 (20 mm) screws.
Mounting holeGrounding hole
Produktspezifikationen
| Marke: | StarTech.com |
| Kategorie: | Nicht kategorisiert |
| Modell: | GNDBAR1U |
Brauchst du Hilfe?
Wenn Sie Hilfe mit StarTech.com GNDBAR1U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert StarTech.com
StarTech.com CBMMCTTOOL Bedienungsanleitung StarTech.com SATDOCK2520 Bedienungsanleitung StarTech.com MHD2VGA Bedienungsanleitung StarTech.com KD07694 Bedienungsanleitung StarTech.com EXSFP1GESXST Bedienungsanleitung StarTech.com USB32DVCAPRO Bedienungsanleitung StarTech.com SATDOCKU3SP Bedienungsanleitung StarTech.com UNIRAILS1U Bedienungsanleitung
Beliebt in Nicht kategorisiert
StarTech.com RK1233BKM Bedienungsanleitung StarTech.com UE1205CB Bedienungsanleitung StarTech.com MONSTND Bedienungsanleitung