StarTech.com HSB1SATSASBA Bedienungsanleitung

Lies die bedienungsanleitung für StarTech.com HSB1SATSASBA (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 15 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 3 Bewertungen. Hast du eine Frage zu StarTech.com HSB1SATSASBA oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Quick-start guide

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 03/09/2017

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/HSB1SATSASBA.

Package contents

• 1 x backplane

• 2 x keys

• 4 x drive-mounting screws

• 1 x quick-start guide

Requirements

• 5.25” drive bay

• 3.5” SATA or SAS hard drive

Requirements are subject to change. For the latest requirements,

please visit www.StarTech.com/HSB1SATSASBA.

HSB1SATSASBA

3.5” SATA/SAS Hard Drive Backplane for 5.25” Bay - Trayless, Hot-Swap

*actual product may vary from photos

Introduction

The HSB1SATSASBA trayless hard drive backplane supports 3.5”

SATA I/II/III or SAS I/II hard drives and ts a 5.25” bay. The lock and

key security feature helps to secure your hard drive by preventing

unauthorized access. The HSB1SATSASBA includes mounting screw

holes that you can use to connect an optional 40 mm fan to dissipate

any generated heat.

Product diagram

Front view

Back view

Security lock

Power and activity LEDDoor

SATA or SAS connector

Mounting holes

for optional fan

Install the backplane

Warning! Always handle storage devices with caution. Make sure

that you’re properly grounded by wearing an anti-static strap when

you install any computer component. If an anti-static strap isn’t

available, touch a large, grounded metal surface for several seconds

to discharge any built-up static electricity.

1. Turn o your computer and any devices or peripherals that are

connected to it.

2. Unplug the power cable from the back of your computer.

3. Disconnect any peripheral devices that are connected to your

computer.

4. Open your computer case. For more information about how

to do this, consult the documentation that came with your

computer system.

5. Remove the cover of an empty drive bay.

6. Insert the backplane into the empty drive bay slot, making sure

that the screw holes on the backplane are aligned with the holes

in the drive bay.

7. Use the provided screws to secure the backplane to the drive

bay.

8. Connect the SATA or SAS power and data cables to the SATA or

SAS connector on the backplane.

9. Place the cover back onto your computer case.

10. Reconnect the power cable to the back of your computer.

11. Reconnect any devices or peripherals that were connected to

your computer.

12. Turn on your computer.

Produktspezifikationen