StarTech.com P2ADDH462-KVM-SWITCH Bedienungsanleitung
Seiten 1 Schalter
Lies die Bedienungsanleitung für StarTech.com P2ADDH462-KVM-SWITCH kostenlos online oder lade das PDF herunter. 15 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
Hotkey Command Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Hotkey Command Revision: April 21, 2025
2-Port Dual-Monitor HDMI/DisplayPort KVM Switch - 4K 60Hz - USB 5Gbps
Product IDs
P2ADDH462-KVM-SWITCH
Product Information
For the latest software, manuals, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/P2ADDH462-KVM-SWITCH
Hotkey Commands
Hotkey commands are keystroke sequences that initiate computer/device functions
and can be used to initiate KVM Switch functions. A hotkey command sequence must
be initiated by the HK_LCode (HotKey Leading Code), followed by 1-2 additional
keystrokes. Successful hotkey command inputs result in a high-pitch beep. Unsuccessful
hotkey command inputs result in a low-pitched beep.
Notes:
- All keystroke combinations must be entered in rapid succession.
- Press and release the indicated keys, unless otherwise specied.
HK_LCode
Option 1.1
• Scr Lck Scr Lck +
Option 1.2
To change the HK_LCode:
• HK_LCode + H + Esc, Caps, or F12
• Alternatively, press and hold the front for , until 2 beeps Host Selection ButtonPC2
are emitted, then press the desired leading hotkey of Scr Lck, ESC, Caps, or F12
Hotkey CommandFunction
HK_LCode1 ~ 2 +
or
HK_LCodeF1 ~ F2 +
• Select PC 1 or PC 2.
HK_LCode + W
• Disable the binding between PC (USB/Video) and Audio
when switching between PC 1 or PC 2.
• Allows switching of PC Ports USB and Video functions,
while Audio does not switch
HK_LCode + Q
• Enable the binding of PC (USB/Video) and Audio
switching.
• Audio will switch with the PC Ports USB and Video
functions.
• Enabled by default.
HK_LCodeF5 ~ F6 +
• Audio Unbound: Selects only the audio and mic source
between PC 1 or PC 2, does not switch USB and Video
• Audio Bound: Select PC 1 or PC 2 and their respective
USB/Video/Audio Ports
HK_LCode + Up Arrow
Key
or
HK_LCode + Down
Arrow Key
• Select the next/previous PC Port.
• If Audio is unbound, the audio will not switch
HK_LCode + B
• Disable the Beep that indicates HotKey Command
Inputs.
HK_LCode + S
• Enable Autoscan.
• Press any key to stop the Autoscan function.
HK_LCode + H + “x”
• Dene the Autoscan time delay.
• “x” = 1 - 10sec, 2 - 20sec, 3 - 30sec, 4 - 40sec, 5
- 50sec, 6 - 60sec, 7 - 70sec, 8 - 80sec, 9 - 90sec, 0 -
100sec
Produktspezifikationen
| Marke: | StarTech.com |
| Kategorie: | Schalter |
| Modell: | P2ADDH462-KVM-SWITCH |
Brauchst du Hilfe?
Wenn Sie Hilfe mit StarTech.com P2ADDH462-KVM-SWITCH benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalter StarTech.com
StarTech.com SYNX-2653250 Bedienungsanleitung StarTech.com DVIVGAYMM6 Bedienungsanleitung StarTech.com SV431HDU3A2 Bedienungsanleitung StarTech.com NOTECONS02-VGA-MDP Bedienungsanleitung StarTech.com IES51000 Bedienungsanleitung StarTech.com R8AD122-KVM-SWITCH Bedienungsanleitung StarTech.com R8AH202-KVM-SWITCH Bedienungsanleitung StarTech.com C2-DD46-UA2-CBL-KVM Bedienungsanleitung
Alle StarTech.com Schalter Bedienungsanleitungen
Beliebt in Schalter
StarTech.com SV431DVIUA Bedienungsanleitung StarTech.com SV1641HDIE Bedienungsanleitung StarTech.com SV411KA Bedienungsanleitung
Bedienungsanleitung Schalter
Neueste Bedienungsanleitungen für Schalter
Cisco SG350X Bedienungsanleitung Tenda TEG1100 Bedienungsanleitung Axis T8524 Bedienungsanleitung Rutenbeck SR 5TX GB Bedienungsanleitung Axis T8127 Bedienungsanleitung Axis T8516 Bedienungsanleitung HP Aruba 2530-48G Bedienungsanleitung Sophos CS110-48FP Bedienungsanleitung Value 21.99.1189 Bedienungsanleitung Huawei S310S Bedienungsanleitung