StarTech.com P2CDD143-KVM-SWITCH Bedienungsanleitung
Seiten 1 Schalter
Lies die Bedienungsanleitung für StarTech.com P2CDD143-KVM-SWITCH kostenlos online oder lade das PDF herunter. 34 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
Hotkey Command Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Hotkey Command Revision: October 10, 2023
2-Port Dual Monitor KVM Switch - DisplayPort - 8K 60Hz - USB-C 10Gbps
Product IDs
P2CDD143-KVM-SWITCH
Product Information
For the latest software, manuals, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/P2CDD143-KVM-SWITCH
Hotkey Commands
Hotkey commands are keystroke sequences that initiate computer/device functions.
Hotkey commands can be used to initiate KVM Switch functions. A hotkey command
sequence must be initiated by the HK_LCode, followed by 1-2 additional keystrokes.
Successful hotkey command inputs result in one or two high-pitch beeps. Unsuccessful
hotkey command inputs result in two low-pitched beeps.
Notes:
- All keystroke combinations must be entered in rapid succession.
- Press and release the indicated keys, unless otherwise specied.
HK_LCode
Option 1.1 (Default - Left Side of the Keyboard)
• Left-side + left-side Ctrl Ctrl
Option 1.2 (Right side of the Keyboard)
To enable HK_LCode for the right-side of the keyboard:
• HK_LCode AltCtrlAlt+ hold left-side + press right-side + release
To use HK_LCode Option 1.2:
• Right-side + right-side Ctrl Ctrl
To revert back to Option 1.1 (Default):
• HK_LCodeAlt CtrlAlt + hold right-side + press left-side + release
Option 2
• Hold left-side + + + release ShiftNum LockNum LockShift
Option 3
• Scroll LockScroll Lock +
Hotkey CommandFunction
HK_LCode1 ~ 2 + • Select PC 1 or PC 2
HK_LCodeF1 + • Start Auto Scan
HK_LCodeF2 +
+ or Up Arrow Down
Arrow
• Start Manual Scan -- Manually switch back and forth
between PCs
• Press the or key to select the Up Arrow Down Arrow
next/previous PC
HK_LCodeF3 +
• Adjust Scan Rate -- KVM Switch generates one to four
beeps that indicate the duration of the scan time:
• One beep = 3 seconds
• Two beeps = 8 seconds
• Three beeps = 15 seconds
• Four beeps = 30 seconds
HK_LCode + F5
• Enable/Disable the binding of PC and Audio Switching.
• Bound by default forcing PC and Audio to switch
together
• Unbound = PC Audio stops following the selected
PC when switching (2 high pitched beeps)
• Bound = PC Audio matches the selected PC (1 high
pitched beep)
HK_LCode + A• Force Audio to be bound to the selected PC
Produktspezifikationen
| Marke: | StarTech.com |
| Kategorie: | Schalter |
| Modell: | P2CDD143-KVM-SWITCH |
Brauchst du Hilfe?
Wenn Sie Hilfe mit StarTech.com P2CDD143-KVM-SWITCH benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalter StarTech.com
StarTech.com C2-DH46-UA2-CBL-KVM Bedienungsanleitung StarTech.com C2-D46-UC2-CBL-KVM Bedienungsanleitung StarTech.com D86A2-2-PORT-8K-KVM Bedienungsanleitung StarTech.com P2DD46A22-KVM-SWITCH Bedienungsanleitung StarTech.com P2DD46A2-KVM-SWITCH Bedienungsanleitung StarTech.com P4AD122-KVM-SWITCH Bedienungsanleitung StarTech.com C2-H46-UC2-PD-KVM Bedienungsanleitung StarTech.com SV1108IPEXGB Bedienungsanleitung
Alle StarTech.com Schalter Bedienungsanleitungen
Beliebt in Schalter
StarTech.com SV431DVIUA Bedienungsanleitung StarTech.com SV1641HDIE Bedienungsanleitung StarTech.com SV411KA Bedienungsanleitung
Bedienungsanleitung Schalter
Neueste Bedienungsanleitungen für Schalter
Legrand TSD703PTUI Bedienungsanleitung Dell N1548 Bedienungsanleitung Dell N1524P Bedienungsanleitung Advantech EKI-2716EI-A Bedienungsanleitung Legrand TSDCL303PW Bedienungsanleitung Legrand TSDSSL7AP Bedienungsanleitung Legrand TSD4FBL3P Bedienungsanleitung Legrand TSDCL303PTC Bedienungsanleitung Legrand TSD4FBL3PW Bedienungsanleitung Legrand TSDCL303PI Bedienungsanleitung