StarTech.com PCI2S485LP Bedienungsanleitung

Lies die bedienungsanleitung für StarTech.com PCI2S485LP (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 45 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 9 Bewertungen. Hast du eine Frage zu StarTech.com PCI2S485LP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1 x PCI2S485LP/15 PCI Card•

1 x Driver CD•

1 x User Manual•

Available PCI or PCI-X port•

Microsoft Windows• ® 2000/XP/Vista, Linux®

WARNING! PCI cards, like all computer equipment,

can be severely damaged by static electricity. Be sure

that you are properly grounded before opening your

computer case or touching your card. StarTech.com

recommends that you wear an anti-static strap when

installing any computer component. If an anti-static

strap is unavailable, discharge yourself of any static

electricity build-up by touching a large grounded metal

surface (such as the computer case) for several sec-

onds. Also, be careful to handle the card by its edges

and not the gold connectors.

Turn your computer off and any peripherals connected 1.

to the computer (ie. Printers, external hard drives, etc.).

Unplug the power cable from the rear of the power supply

on the back of the computer.

Remove the cover from the computer case.2.

Locate an open PCI or PCI-X slot and remove the metal 3.

cover plate on the rear of the computer case.

Insert the card into the open PCI or PCI-X slot and screw 4.

the bracket to the rear of the case.

Place the cover back onto the computer.5.

Insert the power cable into the socket on the power 6.

supply.

ModeSwitch 1Switch 2Switch 3Switch 4

RS-485 ONONOFF OFF

RS-422 ON ON ON ON

Windows 2000/XP

When the Found New Hardware Wizard appears, click 1.

Next to continue.

Insert the Driver CD (included) into the CD/DVD-ROM 2.

drive. Select Search for the best driver for your device

(recommended) then click on Next.

Select Specify the location... and type d:\Win2K/XP 3.

(where d:\ designates the location of the CD/DVD-ROM

drive). in the text box provided, and click Next.

Click on Next, then Finish.4.

Remove the Driver CD from the CD/DVD-ROM drive and 5.

re-start the computer when prompted.

Windows Vista

Once the computer has rebooted:

Insert the Driver CD (included) into the CD/DVD-ROM 1.

drive. At the Found New Hardware window, click on Lo-

cate and install driver software (recommended), and click

Next on the screen that follows

When a message appears indicating that the publisher of 2.

the driver cannot be verified, please click on Install this

driver software anyways.

Once installation is complete, you will be notified that 3.

NetMos 98xx PCI Multi-I/O Controller has been installed

successfully. Please repeat steps 2 and 3 as necessary.

Produktspezifikationen