StarTech.com PEX2ECDP Bedienungsanleitung

Lies die bedienungsanleitung für StarTech.com PEX2ECDP (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 8 Bewertungen. Hast du eine Frage zu StarTech.com PEX2ECDP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Introduction

Thank you for purchasing a StarTech.com PCI

Express to ExpressCard Adapter.This product

allows you to use an ExpressCard with your PCI

Express enabled PC.

Features

• Supports both 34 and 54 form factor

ExpressCards

• Compliant with PCI Express Base Spec.1.0a

• Works with PCI Express slots that provide

3.3V and 1.5V auxiliary power

System Requirements

• PC with an available PCIExpress slot

• Windows 2000/XP/2003 Server

Package Contents

•PCIExpress to ExpressCard Adapter (1)

•Low Profile Bracket (1)

•3’5-pin Header USB Cable (1)

•User Manual (1)

HHaarrddwwaarreeIInnssttaallllaattiioonn

PPEEXX22EECCDDPPUUsseerrMMaannuuaall

DDuuaallPPrrooffiilleePPCCIIEExxpprreessssttooEExxpprreessssCCaarrddAAddaapptteerr

Please note:

Please note:Although PEX2ECDP supports both USB and PCI Express-based

ExpressCards, only USB-based cards offer hot-swappable connectivity.As such, please

consult the documentation that was included with your purchase of the intended

ExpressCard, to determine whether or not it supports hot-swapping.

1.Make sure that your computer system is unplugged and that you are grounded.

2.Remove the cover of your system (see your computer's user manual for details, if necessary) and

gently turn your computer onto its side, so that the PCIExpress expansion slot openings on the

motherboard are facing upwards.

3.Locate an empty PCI Express slot and remove the metal plate that covers the corresponding rear

bracket.You may need a Phillips screwdriver to perform this step.Retain the screw! You will need it to

secure the card later.

4.Gently insert the card into the empty slot, making sure it is firmly seated.

5.Secure the card in place using the screw you removed in Step 3.

6.Connect the 5-pin header provided by PEX2ECDP to an available USBheader on the host computer,

noting the following diagram.Once complete, replace the cover and power on the computer.

USB

+5V

USB

D+

USB

D-

Signal

Ground

Please note:If the motherboard does not have a USBheader available for connection, please connect

the USBType ‘B’connector provided by PEX2ECDP to an available USBport connected to the mother-

board.Failing this, hot-plugging will not be available for inserted cards.

Produktspezifikationen