StarTech.com PR22GI-NETWORK-CARD Bedienungsanleitung
Seiten 2 Englisch Netzwerkkarte / Adapter
Lies die Bedienungsanleitung für StarTech.com PR22GI-NETWORK-CARD kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 69 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: February 16, 2023
Product Diagram (PR22GI-NETWORK-CARD)
Port/LED/ConnectorFunction
1Bracket
• Secures the card to the Host Computer Case
• The comes pre-installedFull Prole Bracket
• The is included Low Prole Bracket
22x Ethernet Ports• Connect a to the Network CableNetwork Card
• Supports 2.5 Gbps, 1 Gbps, 100 Mbps, and 10 Mbps
3LED Indicators
• Right LED Indicator Link Speedis
• Solid Green: 2.5 Gbps
• Solid Amber: 1 Gbps
• O: 100 or 10 Mbps
• Left LED Indicator Link Statusis
• Solid Green: Active link
• Flashing Green: Activity
4PCIe 2.0 p1-x2 Connector• Insert into a on the PCI Express SlotHost Computer
2-Port 2.5GBase-T Ethernet Network Adapter Card - PCIe 2.0 x2
Package Contents
• 2-Port PCIe 2.5 Gbps Network Card x 1
• Low Prole Bracket x 1
• Quick-Start Guide x 1
Requirements
For the latest requirements, please visit www.startech.com/PR22GI-NETWORK-CARD
• Host Computer with an available PCI Express 2.0 or greater Slot (x2, x4, x8, or x16)
Installation
Install the PCI Express Card
WARNING!
Static Electricity PCI Express Cardscan severely damage. Ensure that you are
adequately before you open your or touch the GroundedHost Computer CasePCI
Express CardAnti-Static Strap Anti-Static Mat . You should wear an or use anwhen
installing any Host Computer component. If an isn’t available, Anti-Static Strap
discharge any built-up static electricity by touching a large Grounded Metal Surface
for several seconds. Only handle the by its edges and don’t touch PCI Express Card
the gold connectors.
1. Turn o the and any that are connected to it Host Computer Peripheral Devices
(e.g. printers, external hard drives, etc.).
2. Unplug the from the back of the .Power Cable Host Computer
3. Disconnect any that are connected to the .Peripheral Devices Host Computer
4. Remove the from the . Consult the documentation that Cover Host Computer Case
came with the for details about doing this safely.Host Computer
5. Locate an open and remove the corresponding PCI Express SlotSlot Cover Plate
from the back of the . Host Computer Case
Note: Consult the documentation that came with the for details Host Computer
about doing this safely. This card works in PCI Express x2, x4, x8, or x16 Slots.
6. Gently insert the into the open and fasten the PCI Express CardPCI Express Slot
BracketHost Computer Case to the back of the .
Note: If you install the into a or a PCI Express Card Small Form Factor Low Prole
Desktop System, it may be necessary to replace the pre-installed standard
Full Prole Bracket Low Prole Bracketwith the included .
24
1
3
*Product may vary from image
Produktspezifikationen
| Marke: | StarTech.com |
| Kategorie: | Netzwerkkarte / Adapter |
| Modell: | PR22GI-NETWORK-CARD |
| Breite: | 112 mm |
| Tiefe: | 120 mm |
| Gewicht: | 60 g |
| Produktfarbe: | Schwarz |
| Übertragungstechnik: | Kabelgebunden |
| Höhe: | 18 mm |
| Betriebstemperatur: | 0 - 55 °C |
| Relative Luftfeuchtigkeit in Betrieb: | 5 - 90 % |
| Verpackungsbreite: | 170 mm |
| Verpackungstiefe: | 142 mm |
| Verpackungshöhe: | 30 mm |
| Paketgewicht: | 66 g |
| Netzstandard: | IEEE 1588, IEEE 802.3ab, IEEE 802.3bz, IEEE 802.3i, IEEE 802.1as, IEEE 802.1p, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3az, IEEE 802.1x |
| Quality of Service (QoS) Support: | Ja |
| Anzahl Ethernet-LAN-Anschlüsse (RJ-45): | 2 |
| Maximale Datenübertragungsrate: | 2500 Mbit/s |
| Ethernet LAN Datentransferraten: | 10,1000,2500,100,2000 Mbit/s |
| Eingebaut: | Ja |
| LED-Anzeigen: | Activity, Link |
| Temperaturbereich bei Lagerung: | -10 - 70 °C |
| Kupfer Ethernet Verkabelungstechnologie: | 100BASE-TX, 10BASE-TX, 1000BASE-T, 2500BASE-T |
| Jumbo Frames Unterstützung: | Ja |
| Anzahl Produkte pro Versandkarton: | 80 Stück(e) |
| Länge des Versandkartons: | 325 mm |
| Breite des Versandkartons: | 605 mm |
| Höhe des Versandkartons: | 385 mm |
| Schnittstelle: | Ethernet |
| Schnellinstallationsanleitung: | Ja |
| Komponente für: | PC / Server |
| Ethernet Schnittstellen Typ: | Gigabit Ethernet, 2.5 Gigabit Ethernet, Fast Ethernet |
| Unterstützte Linux-Betriebssysteme: | Ja |
| Jumbo-Frames: | 9000 |
| Hostschnittstelle: | PCI Express |
| Wake-on-LAN bereit: | Ja |
| Unterstützte Server-Betriebssysteme: | Windows Server 2019, Windows Server 2022 |
| Chipsatz: | Intel I225-V |
| Auto MDIX IEEE: | Ja |
| PCI version: | 2.0 |
| Niederprofilhalterung: | Ja |
| Ethernet/LAN: | Ja |
| VLAN-Tagging: | Ja |
Brauchst du Hilfe?
Wenn Sie Hilfe mit StarTech.com PR22GI-NETWORK-CARD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten