StarTech.com SAT2IDEADP Bedienungsanleitung


Lies die bedienungsanleitung für StarTech.com SAT2IDEADP (2 Seiten) kostenlos online; sie gehört zur Kategorie Kabel für PCs und Peripheriegeräte. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 3.8 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu StarTech.com SAT2IDEADP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Manual Revision:01/10/2011
For the most up-to-date information, please visit www.startech.com
• 1 x SATA to IDE adapter
• 1 x 40-pin IDE cable
• 1 x 40-pin to 44-pin IDE cable with power
• 1 x SP4 to LP4 Power cable
• 1 x Package of mounting screws
• 1 x Installation Guide
• 2.5in 44-pin IDE hard drive or 3.5in 40-pin IDE hard
drive
1. If connecting a 3.5in (40-pin) IDE hard drive, connect
the 40-pin IDE ribbon cable to the 40-pin connector
on the inside of the SAT2IDEADP.
2. Connect the large 4-pin LP4 power cable to the small
4-pin SP4 floppy power connector on the inside of
the SAT2IDEADP.
3. Connect the ribbon cable and power cable to the
connectors on the IDE hard drive.
4. Place the IDE hard drive on the tray of the
SAT2IDEADP and line up the mounting holes on the
drive with the openings on the bottom of the tray.
5. Use the provided screws to fasten the drive to the
tray.
*actual product may vary from photos


Produktspezifikationen

Marke: StarTech.com
Kategorie: Kabel für PCs und Peripheriegeräte
Modell: SAT2IDEADP

Brauchst du Hilfe?

Wenn Sie Hilfe mit StarTech.com SAT2IDEADP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten