StarTech.com SU2DUPERA11 Bedienungsanleitung

Lies die bedienungsanleitung für StarTech.com SU2DUPERA11 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 9 Bewertungen. Hast du eine Frage zu StarTech.com SU2DUPERA11 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Quick-start guide

Manual Revision: 10/24/2016

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/SU2DUPERA11.

Package contents

• 1 x SATA/USB duplicator and eraser

• 1 x universal power adapter (NA/JP, UK, EU, AU)

• 2 x drive-connector cables

• 2 x drive pads

• 1 x quick-start guide

System requirements are subject to change. For the latest

requirements, please visit www.StarTech.com/SU2DUPERA11.

SU2DUPERA11

Standalone Drive Duplicator and Eraser for USB Flash Drives and 2.5”/3.5” SATA SSDs /HDDs

*actual product may vary from photos

Read and understand the entire manual before Important:

you use this product, and follow the instructions as they are

outlined in the manual.

Failure to do so might result in property damage or device

failure.

Product diagram

USB source

port

SATA source port

LCD display

Menu navigation

buttons

OK button

Exit button

USB source LEDs

SATA source LEDs

USB target port

SATA target

port

USB target LEDs

SATA

target LEDs

Power switch

Power jack

Erase and copy modes

The SU2DUPERA11 supports ve erase modes and four copy modes.

Mode Denition

Erase modes

Quick eraseThe partition table is quickly erased.

Full eraseThe entire drive is erased.

DoD 5220.22-M eraseA three-pass overwrite based on

DoD 5220.22-M specications

is completed.

DoD 5220.22-M erase

and compare

A three-pass overwrite based on

DoD 5220.22-M specications

is completed and compared.

Secure eraseThe ATA Secure Erase feature of the

drive is executed.

Note: The Secure Erase feature isn’t

supported on USB drives.

Copy modes

Copy system and lesOnly the data area of the source drive is

copied and the empty space

isn’t copied.

Copy all partitionsAll of the partitions and data, including

blank partitions, are copied. Blank space

and nonpartition space isn’t copied.

Copy the whole driveThe entire drive is copied, including

empty space.

Copy a percentageA specied percentage range of the

drive is copied.

About copying drives

You can use the SU2DUPERA11 to copy SATA drives in any of the

following congurations:

• SATA drive to SATA drive

• SATA drive to USB drive

• USB drive to USB drive

• USB drive to SATA drive

Copy a SATA or USB drive

Note: You should avoid plugging SATA drives directly into the

SU2DUPERA11, as it puts undue strain on the device connectors. Use

the drive-connector cables instead.

Warning! Make sure that the storage capacity of the target drive

is larger than or equal to the storage capacity of the source drive.

Otherwise, you will get an error when you try to copy your drive.

Warning! After you begin copying a drive, don’t disconnect either

drive or interrupt the process before it has nished. Doing so might

result in damage to the drive or lost data.

Produktspezifikationen