StarTech.com UNIRAILS1UB Bedienungsanleitung

Lies die bedienungsanleitung für StarTech.com UNIRAILS1UB (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 3 Bewertungen. Hast du eine Frage zu StarTech.com UNIRAILS1UB oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: August 23, 2019 10:33 AM

Product Diagram (UNIRAILS1UB)

ComponentFunction

1

Adjustable Depth Basic 1U

Universal Server Rail

• Used to securely mount equipment (1U in

height) in a Server Rack.

• Maximum Weight Capacity = 200 lb. (91.7 kg)

2Front Bracket

• Used to secure the Server Rail to a Server

Rack.

3Back Bracket

• Used to secure the Server Rail to a Server

Rack.

Requirements

For the latest requirements, please visit www.startech.com/UNIRAILS1UB

• Cage Nut Tool x 1 (Optional)

• Phillips Head Screwdriver x 1

4-Post 1U Universal Adjustable Mounting Depth Rack Rail

Package Contents

• Adjustable Depth Basic 1U Universal Server Rail x 2

• M6-12 Screws x 8

• Cage Nuts x 8

• M6 Plastic Cap Washers x 8

• Quick-Start Guide x 1

Installing the Server Rail

1. Insert the Cage Nuts x 4 into the Cage Nut Holes on the front and back Rails of the

Server Rack.

Note: You can use a Cage Nut Tool to aid in the installation of the Cage Nuts.

2. Align the Screw Hole on the Back Bracket on the Server Rail with the Cage Nuts

(inserted in step 1) on the back Rail on the Server Rack.

3. Slide an M6 Plastic Cap Washer over-top of the M6-12 Screw.

4. Insert an M6-12 Screw through the Server Rail Screw Hole and into the Cage Nut.

5. Insert a second M6-12 Screw through the bottom Washer and Server Rail Screw

Hole and into the Cage Nut.

6. Using a Phillips Head Screwdriver tighten the M6-12 Screws, being careful not to

over-tighten.

7. Align the Screw Hole on the Front Bracket on the Server Rail with the Cage Nuts

(inserted in step 1) on the front Rail on the Server Rack.

8. Slide an M6 Plastic Cap Washer over-top of the M6-12 Screw.

9. Insert an M6-12 Screw through the Server Rail Screw Hole and into the Cage Nut.

10. Insert a second M6-12 Screw through the bottom Washer and Server Rail Screw

Hole and into the Cage Nut.

11. Using a Phillips Head Screwdriver tighten the M6-12 Screws, being careful not to

over-tighten.

12. Repeat Steps 1 - 11 to install the second Server Rail.

2

3

1

Produktspezifikationen