StarTech.com USB2LINK Bedienungsanleitung


Lies die bedienungsanleitung für StarTech.com USB2LINK (2 Seiten) kostenlos online; sie gehört zur Kategorie Kabel für PCs und Peripheriegeräte. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 14 Bewertungen. Hast du eine Frage zu StarTech.com USB2LINK oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 03/31/2015
For the latest information, technical specications, and support for
this product, please visit www.startech.com/USB2link.
Packaging contents
1 x USB Data Transfer Cable
1 x Instruction Manual
1 x Driver CD
System requirements
Available USB port on Source and Destination computers
Windows® XP SP2 or SP3 (32/64-bit), Windows Vista® (32/64-bit),
Windows® 7 (32/64-bit), Windows 8 (32/64-bit)
Supported transfer modes:
Windows XP to Windows Vista
Windows XP to Windows 7
Windows XP to Windows 8
Windows Vista to Windows Vista
Windows Vista to Windows 7
Windows Vista to Windows 8
Windows 7 to Windows 7
Windows 7 to Windows 8
Windows 8 to Windows 8
Note: In Windows 8.1, Microsoft removed support for cables from
the Windows Easy Transfer software. As such, Windows 8.1 and later
doesn’t support the USB2Link cable.
USB2LINK
USB Easy Transfer Cable for Windows
Installation
Note: The Windows Easy Transfer software doesn’t support
transferring les from a 64-bit operating system to a 32-bit operating
system.
1. To transfer les from Windows XP (source) to Windows Vista
(destination), download the Windows Easy Transfer (WET)
software from the Microsoft website and install the software onto
the XP computer:
http://www.microsoft.com/downloads/details.
aspx?FamilyId=2B6F1631-973A-45C7-A4EC-
4928FA173266&displaylang=en.
To transfer les from Windows XP/ Windows Vista (source)
to Windows 7/ 8 (destination), rst run the Windows Easy
Transfer software on the Windows 7/ 8 computer and follow
the instructions to copy the software onto the older operating
system.
2. Once the proper version of Windows Easy Transfer is installed on
both computers, connect the USB Transfer cable between the two
computers.
*actual product may vary from photos
Specications
Host Interface USB 2.0
Connectors 2 x USB type A male
Supported Transfer
Modes
Windows XP to Windows Vista
Windows XP to Windows 7
Windows XP to Windows 8
Windows Vista to Windows Vista
Windows Vista to Windows 7
Windows Vista to Windows 8
Windows 7 to Windows 7
Windows 7 to Windows 8
Windows 8 to Windows 8
Cable Length 2 meters (6.6 ft)
Supported Operating
System
Windows XP SP2 or SP3 (32/64 bit),
Windows Vista (32/64 bit), Windows 7
(32/64 bit), Windows 8 (32/64 bit)
Note: Windows 8.1 doesn’t support the USB2Link cable.
3. Windows may automatically prompt you to run the Windows
Easy Transfer software. If not, then launch the software on both
computers and follow the instructions provided by the software.
4. PCLinq3 software is included in the CD and can be used to
transfer les between two Windows PCs. The location of the
software is: /USB2LINK/Prolic/PL25A1/PCLinq3.


Produktspezifikationen

Marke: StarTech.com
Kategorie: Kabel für PCs und Peripheriegeräte
Modell: USB2LINK

Brauchst du Hilfe?

Wenn Sie Hilfe mit StarTech.com USB2LINK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten