Stauer 33728 Bedienungsanleitung
Stauer
Armbanduhr
33728
Lies die bedienungsanleitung für Stauer 33728 (1 Seiten) kostenlos online; sie gehört zur Kategorie Armbanduhr. Dieses Handbuch wurde von 47 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 24 Bewertungen. Hast du eine Frage zu Stauer 33728 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
WATCH DISPLAY TIMESETTING
INSTRUCTION MANUAL
Stauer Classic
Chronograph Watch
Visit us at www.stauer.com
to learn more about the fantastic
benefits of owning a Stauer Watch!
www.stauer.com
0 1 2
12
Stauer
A - Start/Stop Button
B - Crown
C - 24-Hour Dial
D - Split/Reset Button
E - Date Window
F - Chronograph Second Dial
G - Chronograph Minute Dial
TO SET THE TIME
1. Pull the crown (part B) out to position “2”
and rotate it to the desired time.
2. Once the correct time is set, push the
crown back into “0” (zero) position. e
Second Hand (part F) will start to run.
TO SET THE DATE
1. Pull the crown (part B) out to position
“1” and rotate it clockwise (away from you) to
the desired date (part E).
2. Once the correct date is set, push the crown
back into “0” (zero) position.
NOTE: e date should not be adjusted
between the hours of 9pm and 1am.
TO SET THE CHRONOGRAPH
is chronograph is able to measure and
display time in 1 second increments up to
a maximum of 59 minutes (part H) and
59 seconds (part G).
1. To start the Chronograph feature, press
the Start/Stop Button (part A). To measure
split times press the Split/Reset Button (part
D) to stop counting.
2. Press the Split/Reset Button (part D) to
reset the chronograph, and the Second Hand
(part F), the Chronograph Minute Dial (part
G) and the Chronograph Second Dial (part F)
will all return to the zero position.
3. For split time, press the Split/Reset Button
(part D) again after stopping the chronograph
to restart the chronograph function. en
press the Start/Stop Button (part A) to stop,
and the Split/Reset Button (part D) to reset.
When resetting the chronograph, only return
the crown (part B) to the normal “0” (zero)
position when the second hand (part F) is in
the 12 o’clock position. e second hand stops
when the crown is pushed in to the “0” (zero)
position and that position is then recognized
as the “0” (zero) position.
FEATURES
- Precision movement
- Chronograph function
- 24-hour military time subdial
- Date display window
- Stainless steel case and back
- Stainless steel bracelet
- Cotswold™ mineral crystal
- Water resistant to 3 ATM
USING THE CHRONOGRAPH
B.
A.
C.
D.
IMPORTANT
CHRONOGRAPH RESET
Chronograph Reset (includes after
replacing the battery)
1. Pull the crown (part B) out to position “2”.
2. Press the Start/Stop Button (part A) to set
the Chronograph Second Hand (part G) to
the zero position. e chronograph hand can
be advanced rapidly by continuously pressing
the Start/Stop Button (part A).
3. Once the Chronograph Second Hand
(part G) has been set to the zero position,
push the crown (part B) back into “0” (zero)
position.
E.
G. F.
Produktspezifikationen
| Marke: | Stauer |
| Kategorie: | Armbanduhr |
| Modell: | 33728 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Stauer 33728 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Armbanduhr Stauer
15 Juni 2023
15 Juni 2023
15 Juni 2023
5 Juni 2023
5 Juni 2023
Bedienungsanleitung Armbanduhr
- Festina
- Nixon
- So & Co
- Davis
- Breo
- Hamilton
- Triwa
- Stührling
- ETT
- Mondaine
- Torgoen
- Emporio Armani
- Krontaler
- TicWatch
- Suunto
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025