Steren MOC3011 Bedienungsanleitung
Seiten 6 Engels Nicht kategorisiert
Lies die Bedienungsanleitung für Steren MOC3011 kostenlos online oder lade das PDF herunter. 20 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
(250 Volts Peak)
The MOC3010 Series consists of gallium arsenide infrared emitting diodes,
optically coupled to silicon bilateral switch and are designed for applications
requiringsolateriariggeringow–currensolatewitchingigh id tc t, lt id ac s, h
electrical isolation (to 7500 Vac peak), high detector standoff voltage, small
size, and low cost.
•
To order devices that are tested and marked per VDE 0884 requirements, the
sux ”V” must be included at end of part number. VDE 0884 is a test option.
Recommended for 115 Vac(rms) Applications:
•Solenoid/Valve Controls
•Lamp Ballasts
•Interfacing Microprocessors to 115 Vac Peripherals
•Motor Controls
•Static ac Power Switch
•Solid State Relays
•Incandescent Lamp Dimmers
MAXIMUM RATINGS (TA = 25C unless otherwise noted)°
RatingSymbol ValueUnit
INFRARED EMITTING DIODE
Reverse VoltageVR3 Volts
Forward Current — ContinuousIF60 mA
Total Power Dissipation @ T
A = 25C°
Negligible Power in Transistor
Derate above 25°C
PD100
1.33
mW
mW/ C°
OUTPUT DRIVER
O–State Output Terminal VoltageVDRM 250 Volts
Peak Repetitive Surge Current
(PW = 1 ms, 120 pps)
ITSM 1 A
Total Power Dissipation @ T
A = 25C°
Derate above 25°C
PD300
4
mW
mW/ C°
TOTAL DEVICE
Isolation Surge Voltage(1)
(Peak ac Voltage, 60 Hz, 1 Second Duration)
VISO 7500 Vac(pk)
Total Power Dissipation @ T
A = 25C°
Derate above 25°C
PD330
4.4
mW
mW/ C°
Junction Temperature RangeT
J–40 to +100C°
Ambient Operating Temperature Range(2) TA–40 to +85C°
Storage Temperature Range
(2) T
stg –40 to +150C°
Soldering Temperature (10 s)T
L260 C°
1.Isolation surge voltage, VISO, is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.
2.Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
Order this document
by MOC3010/D
SEMICONDUCTOR TECHNICAL DATA
GlobalOptoisolator
Motorola, Inc. 1995
*Motorola Preferred Device
COUPLER SCHEMATIC
[IFT = 15 mA Max]
STANDARD THRU HOLE
CASE 730A–04
[IFT = 10 mA Max]
[IFT = 5 mA Max]
1. ANODE
2. CATHODE
3. NC
4.MAIN TERMINAL
5. SUBSTRATE
DO NOT CONNECT
6.MAIN TERMINAL
1
2
3
6
5
4
STYLE 6 PLASTIC
61
(Replaces MOC3009/D)
Produktspezifikationen
| Marke: | Steren |
| Kategorie: | Nicht kategorisiert |
| Modell: | MOC3011 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Steren MOC3011 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Steren
Steren ALA-005 Bedienungsanleitung Steren INV-150 Bedienungsanleitung Steren MODLED-010 Bedienungsanleitung Steren BILL-300 Bedienungsanleitung Steren HER-253 Bedienungsanleitung Steren ELI-1040 Bedienungsanleitung Steren REG-1050 Bedienungsanleitung Steren COM-220 Bedienungsanleitung
Beliebt in Nicht kategorisiert
Steren STV-066 Bedienungsanleitung Steren HER-258 Bedienungsanleitung Steren COM-211 Bedienungsanleitung