Steren SN74LS47N Bedienungsanleitung

Lies die bedienungsanleitung für Steren SN74LS47N (8 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 34 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 17.5 Bewertungen. Hast du eine Frage zu Steren SN74LS47N oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

 Semiconductor Components Industries, LLC, 1999

December, 1999 – Rev. 6

1Publication Order Number:

SN74LS47/D

The SN74LS47 are Low Power Schottky BCD to 7-Segment

Decoder/Drivers consisting of NAND gates, input buers and seven

AND-OR-INVERT gates. They offer active LOW, high sink current

outputs for driving indicators directly. Seven NAND gates and one

driver are connected in pairs to make BCD data and its complement

available to the seven decoding AND-OR-INVERT gates. The

remaining NAND gate and three input buers provide lamp test,

blanking input/ripple-blanking output and ripple-blanking input.

The circuits accept 4-bit binary-coded-decimal (BCD) and,

depending on the state of the auxiliary inputs, decodes this data to

drive a 7-segment display indicator. The relative positive-logic output

levels, as well as conditions required at the auxiliary inputs, are shown

in the truth tables. Output congurations of the SN74LS47 are

designed to withstand the relatively high voltages required for

7-segment indicators.

These outputs will withstand 15 V with a maximum reverse current

of 250µA. Indicator segments requiring up to 24 mA of current may

be driven directly from the SN74LS47 high performance output

transistors. Display patterns for BCD input counts above nine are

unique symbols to authenticate input conditions.

The SN74LS47 incorporates automatic leading and/or trailing-edge

zero-blanking control (RBI and RBO). Lamp test (LT) may be

performed at any time which the BI/RBO node is a HIGH level. This

device also contains an overriding blanking input (BI) which can be

used to control the lamp intensity by varying the frequency and duty

cycle of the BI input signal or to inhibit the outputs.

•Lamp Intensity Modulation Capability (BI/RBO)

•Open Collector Outputs

•Lamp Test Provision

•Leading/Trailing Zero Suppression

•Input Clamp Diodes Limit High-Speed Termination Effects

GUARANTEED OPERATING RANGES

SymbolParameterMinMax UnitTyp

VCC Supply Voltage4.755.05.25V

TAOperating Ambient

Temperature Range

025 70C°

I

OH Output Current – High

BI/RBO

– 50A

IOL Output Current – Low

BI/RBO

BI/RBO

3.2 mA

VO(off) O–State Output Voltage

a to g

15 V

IO(on) On–State Output Current

a to g

24 mA

LOW

POWER

SCHOTTKY

SOIC

D SUFFIX

CASE 751B

http://onsemi.com

PLASTIC

N SUFFIX

CASE 648

16

1

16

1

Device PackageShipping

ORDERING INFORMATION

SN74LS47N16 Pin DIP2000 Units/Box

SN74LS47D16 Pin2500/Tape & Reel

Produktspezifikationen