Sun Joe SPX-PWB1-RM Bedienungsanleitung


Lies die bedienungsanleitung für Sun Joe SPX-PWB1-RM (4 Seiten) kostenlos online; sie gehört zur Kategorie Hochdruckreiniger. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 10 Bewertungen. Hast du eine Frage zu Sun Joe SPX-PWB1-RM oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
R
SPX-PWB1-RM ASSEMBLY QUICK GUIDE
1-866-SNOWJOE (1-866-766-9563)
If you have any questions or comments,
please call the Snow Joe® + Sun Joe® customer service department at:
R
SPX-PWB1-RM ASSEMBLY QUICK GUIDE
1-866-SNOWJOE (1-866-766-9563)
If you have any questions or comments,
please call the Snow Joe® + Sun Joe® customer service department at:
Most SPX2000 Series + SPX4003-ELT, SPX7001E
Trigger gun Scrubbing broom rst piece Locking collar
Most SPX3000 and SPX4000 Series
Trigger gun Transfer adapter Scrubbing broom rst piece Locking collar
SPX2000, SPX2500, SPX2600, SPX4003, SPX4003-ULT
Trigger gun Locking collarScrubbing broom rst piece
SPX200/1000 Series
Trigger gun Locking collarScrubbing broom rst pieceMiddle wand
1
FOR USE WITH
SPX2000, SPX2500, SPX2600, SPX4003, SPX4003-ULT:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the scrubbing broom and align the two tabs with the trigger gun.
3. Once aligned, push the top piece into the trigger gun, twist counter clockwise to lock into place.
4. Use the locking collar to secure the scrubbing broom in place. Move up and twist to lock.
FOR USE WITH
MOST SPX2000 SERIES + SPX4003-ELT, SPX7001E:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the scrubbing broom and align the two tabs with the trigger gun.
3. Once aligned, push the top piece into the trigger gun, twist counter clockwise to lock into place.
4. Use the locking collar to secure the scrubbing broom in place. Move up and twist to lock.
FOR USE WITH
SPX200/1000 SERIES:
1. Disconnect your spray wand assembly so that only the middle wand remains attached to your trigger gun.
2. Take the scrubbing broom and align the two tabs with the middle wand.
3. Once aligned, push the scrubbing broom into the middle wand and twist counter clockwise to lock into place.
4. Use the locking collar to secure the scrubbing broom in place. Move up and twist to lock.
2
FOR USE WITH
MOST SPX3000 AND SPX4000 SERIES:
1. If not already done, detach your spray wand from your trigger gun.
2. Attach the transfer adapter to your trigger gun.
3. Take the scrubbing broom and align the two tabs with the transfer adapter.
4. Once aligned, push the top piece into the transfer adapter, twist counter clockwise to lock into place.
5. Use the locking collar to secure the scrubbing broom in place. Move up and twist to lock.


Produktspezifikationen

Marke: Sun Joe
Kategorie: Hochdruckreiniger
Modell: SPX-PWB1-RM

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sun Joe SPX-PWB1-RM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten