Supermicro SuperServer SYS-110P-FWTR Bedienungsanleitung

Lies die bedienungsanleitung für Supermicro SuperServer SYS-110P-FWTR (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 83 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 42 Bewertungen. Hast du eine Frage zu Supermicro SuperServer SYS-110P-FWTR oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

SuperServer 110P-FWTR Quick Reference Guide

Caution

SAFETY INFORMATION



!

WARNING:

IMPORTANT: See installation instructions and safety warning before connecting system

to power supply.

http://www.supermicro.com/about/policies/safety_information.cfm



!

To reduce risk of electric shock/damage to equipment, disconnect power from server by

disconnecting all power cords from electrical outlets.

If any CPU socket empty, install protective plastic CPU cap

WARNING:



!

Always be sure all power supplies for this system have the same power output. If mixed

power supplies are installed, the system will not operate.

For more information go to : http://www.supermicro.com/support

Board Layout

Rear View

Front View and Features

System OverviewBMC ADMIN User Password

Ps Both Notches res

Saht Dn into the trigow

Memory Slot

Notches

Rele Tabseas

DInMM Installioat

Memory

BIOS

LICENSE

1

BAR CODEIPMI CODEMAC CODESAN MAC

DESIGNED IN USA

X12SPW-TF/F

REV: 2.00

JNCSI1

JBT1

S-SGPIO1

JPWR2

JSD2

JSD1

S-S A1AT

JSTBY1

JRK1

S-S A0AT

JPWR3 JPWR1

JF1

JVRM2

JVRM1

JPFR3

JPFR2

JPFR1

JL1

JD1

JPRG1

JWD1

P4

FAN6

FAN7

FAN4

FAN3

FAN5

FAN1

BT1

NVME0/1

NVME2/3

MH16MH15

JP 2C1

JIPMB1

JNVI2C

JI2C_EXP1

MH4

MH6

MH1

MH9

MH5

MH3

MH2

JPME1

JPL2

JMP2

JMP1

JPL1

JPL3

SXB2: PCI-E 4.0 X16

SXB1A SXB1B: PCI-E 4.0 X6 + X16

SXB1C

COM2

M.2-H

COM1

DIMMG1

I-S A4~7AT

DIMMH1

DIMME1

DIMMF1

DIMMA1

DIMMB1

DIMMD1

DIMMC1

CPU

USB6/7(3.0)

USB4/5 (3.0)

USB2/3

LAN2 LAN1

CMOS CLEAR

TPM/PORT80

I-S A0~3AT

UID-SW

UID-LED

VGA

USB0/1

IPMI_LAN

USB8(3.0)

LE3

LEDBMC

LE4

FAN2

7910

CPU Installation and Removal

123Supports a single Intel Xeon Ice Lake Scalable Processor (LGA 4189)

46 75

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

Item

1

Description

2

3

VGA Port

4

Two 10GbE(-TF)/1GbE(-F) LAN Ports

5

USB 3.2 G1 Porten

6

7

Dedicated LAN for IPMI

USB 2.0 Port

8

COM Port (Sl Port)eria

9

COM Port r (Sl Port)Headeeria

10

M.2 PCI-A InterfaceE/SAT

11

12

USB 2.0 erHead

13

TPM erHead

S-SATA0/1: SATA 3.0 Ports with SATA

DOM Perow

I-SATA7: Intl SATA Ports4-erna

Item

14

Description

15

USB 3.2 G1 erenHead

16

Intel RAID Key erHead

17

18

USB 3.2 G1 Ty-A Portenpe

Fnt ntl Pel HeaderroCoroan

19 CPU

20

DIMM A1 Slots1-H

21

NVME0/1: PCI-E 4.0 x8 Se SAS limlin

Connector

22

23

NVME2/3: PCI-E 4.0 x8 Se SAS limlin

Connector

24

S-O erSGPIHead

JIPMB1 n BMC Extl I2C 4-pierna

Header

25

I-SATA3: Intl SATA Ports0-erna

Od CMOS Batterynboar

Rev. 1.0MNL-2406-QRG http://www.supermicro.com

6

8

43 512

1. Insert the desired number of DIMMs into

the memory slots based on the recommended

DIMM population table.

2. Push the release tabs outwards on both

ends of the DIMM slot to unlock it.

3. Align the key of the DIMM module

with the receptive point on the

memory slot.

4. Align the ends of the module against the

receptive points on the ends of the slot.

5. Press the ends of the module straight down

into the slot until the module snaps into place.

6. Press the release tabs to the lock positions

to secure the DIMM module into the slot.

1 CPU, 8-DIMM Slots

Number of DIMMsMemory Population Sequence

1 DIMMA1

2

4

6

8

DIMMA1 / DIMME1

DIMMA1 / DIMME1 / DIMMC1 / DIMMG1

DIMMA1 / DIMME1 / DIMMC1 / DIMMG1 / DIMMB1 / DIMMF1

DIMMA1 / DIMME1 / DIMMC1 / DIMMG1 / DIMMB1 / DIMMF1 / DIMMD1 / DIMMH1

Type Ranks Per DIMM

and Data Width

DIMM Capacity (GB)

1DPC

8 Gb

Speed (MT/s); Voltage (V);

Slot Per Channel (SPC) and DIMM Per

Channel (DPC)

*Data below assumes 2 SPC unless other-

wise noted.

16 Gb1.2V

RDIMM

SRx88 GB16 GB

3200

SRx416 GB32 GB

DRx816 GB32 GB

DRx432GB64 GB

RDIMM-3DS(4R/8R) x42H-64F GB

4H-128 GB

2H-128 GB

4H 256 GB3200

LRDIMMQRx464 GB128 GB3200

LRDIMM-3DS(4R/8R) X44H-128 GB2H-128 GB

4H-256 GB3200

Item Description

Two redundant power supply modules

Serial port

Dedicated IPMI LAN

Two USB 3.2 Gen 1 ports and two USB 2.0 ports

VGA Port

LAN port; 2x 10GbE BaseT port(s)

PCIe 4.0 p1-x16 Full-height full-length slot for PCIe expansion card

1

2

3

4

5

6

7

8

9

10Power Button with Status LED

PCIe 4.0 p1-x16 Full-height full-length slot for PCIe expansion card

PCIe 4.0 p1-x16 low-profile slot for PCIe expansion card

Chassis CSE-515B-R801W with PWS 800w

CSE-515B-R601W with PWS 600w

Motherboard X12SPW-TF

Processor Support3rd Gen Intel® Xeon® Scalable processors up to 205W

Memory Eight DIMM slots, up to 2TB ECC LRDIMM,

DDR4-3200 MHz

Drive SupportTwo internal 2.5" SATA3 drive bays

Expansion Slots

I/O Ports

One PCIe 4.0 p1-x16 LP slot

Two PCIe 4.0 p1-x16 FHFL slots

System Cooling

Two LAN 10GbE ports

One dedicated IPMI/KVM LAN port

One VGA port

One serial port

Two USB 3.2 Gen 1 ports

Two USB 2.0 ports

Six (4cm x 4cm x 5.6cm) counter-rotating fans

Passive Heatsink for 1U System

One air shroud for CPU

One optional air shroud for PCIe cards

Power Redundant DC 600W

Redundant AC 800W

Form Factor1U rackmount,

(WxHxD) 17.2 x 1.7 x 16.9 in. (437 x 43 x 429 mm)

Each system comes with a unique default password for the ADMIN user.

This can be found on a sticker on the motherboard and a sticker

underneath the service tag on chassis. If necessary, the password

can be reset by the Supermicr IPMICFG tool.

For more information, please visit:

https://www.supermicro.com/en/solutions/management-software/bmc-

resources

BMC: XXXXXXXXXXXX

PWD: XXXXXXXXXX

Athe i y. ing Creat Inl Itece Lake Carr er Assembl

A

B

Pin 1

A

lat

llo

ch o n

w ca r

t

r

o C PU

ier to

A

lat

llo

ch o n

w ca r

t

r

o C PU

ier to

A

lat

llo

ch o n

w ca r

t

r

o C PU

ier to

ca r

t

r

o C PU

ier to A

lat

llow

ch o n

1. Locate small gold tin 1 on p andriangle (P)rocessor

coierresponding holloed tiangle on cawrrrr.

2. Urr sing the tiangles as a guide, caefully align and place

Point A of the p into the ca. Gently snap intorocessorrrier

place to fasten onto Point B.

Btheroor tsk. bling Assem PcessHeain

Me (P)odulHM

trr iangle cutout of the heatsink and p“A”ess into place

such that the clips lock in.

1. Turw n the heatsink upside don, and hold the

prrrw ocesso carrie assembly ith the gold contacts facing

up.

2. Ar)w lign the tiangle (Pin 1 on the assembly ith the

Pin1

A

Cpthe CPU for. Prearing Socket

Inlliosta atn

Gently pull o f the plastic potective covefrr

by one co to emove it fom the rnerrrCPU

socket.

Remove the plastic protective

cover from the CPU socket.

Do not touch or bend the socket

pins.

Socket Pins

Dtheroor k Me. Installing PcessHeatsinodul

1. Ar)rr wrr lign the golden tiangle (Pin 1 of the pocessoith the pinted tiangle

on the socket. Ar.ll fou holes should be aligned

2. nsuotating upunlockedErr re that the fouwirr“es ae in an ” (). position

3. Mount the M onto the socket on the mothed and gentlyPHCPUrboar

prFrwir.ess into place. lip the otating es to the sides to a locked position

4. 30W Tith a Torx-rewdrr-rr bit scive, gently tighten peek nuts 14 in the ode

descr.ibed on the heatsink label

#1

#2

#3

#4

RemcessHeatsovtheroing Por inodulk Me

Gently lift the module up to emove it fom the socketrr.3.

4. M Flip the PHwU ith the gold contacts facing up. nlock the

leverr. and gently emove the CPU

1. 30U Tsing a Torx-rewdrrr bit scive, loosen the fou peek nuts in

a backd sequence of 4, 3, 2, 1war.

2. nsuotating upunlockedErr re that the fouwirr“es ae in an ” ()

position. #1

#2

#3

#4

1 2

Item Description

6 Heavy Duty Fans with Optimal Fan Speed Control

Service Tag

1

2

PULL

Pull-out tag with BMC unique

password underneath.

Produktspezifikationen