Synthesis Technology E440 Discrete OTA VCF Bedienungsanleitung


Lies die bedienungsanleitung für Synthesis Technology E440 Discrete OTA VCF (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 11 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 6 Bewertungen. Hast du eine Frage zu Synthesis Technology E440 Discrete OTA VCF oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
E440 Discrete OTA VCF
www.synthtech.com/euro/e440
What is the E440?
The Synthesis Technology E440 is a lowpass voltage-controlled filter with 3 simultaneous outputs.
The input is any audio source (can be from line level to synth level) and the output is via the
different slopes of the filter: 2pole (-12dB/oct), 3pole (-18dB/oct) and 4pole (-24dB/oct). There are
3 CV inputs to control the cutoff frequency plus a separate CV input for the resonance. The E440
will self-oscillate at high resonance and can be used for a sine VCO (each output is phase shifted
45 degrees from the prior one) with 1V/Oct tracking (trimmable) over a 4-octave range. This
response is also temperature-compensated. An external audio mixer module can be used to blend
the 3 outputs into “in-between” slopes and by inverting them relative to another, different
frequency responses.
Connecting to the power supply
The E440 is a +-12V only module and connects to standard Euro power busses via ribbon cable. Be
sure the red stripe on the cable is aligned with the STRIPE lettering on the pc board.


Produktspezifikationen

Marke: Synthesis Technology
Kategorie: Nicht kategorisiert
Modell: E440 Discrete OTA VCF

Brauchst du Hilfe?

Wenn Sie Hilfe mit Synthesis Technology E440 Discrete OTA VCF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten