Taga Harmony TTA-500 Bedienungsanleitung
Taga Harmony
Nicht kategorisiert
TTA-500
Lies die bedienungsanleitung für Taga Harmony TTA-500 (16 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 3 Bewertungen. Hast du eine Frage zu Taga Harmony TTA-500 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/16
TTA-500
CLASS AB VACUUM TUBE STEREO AMPLIFIER
Instruction Manual
IN PUT
SR C D NELI AUX
VOLUME
MI N MAX
POWER
ON
OFF
HT
Edition 02-18
2
Introduction
Thank you for purchasing this TAGA Harmony amplier.
TTA-500 is 2 x 35W Class AB high delity vacuum tube integrated amplier utilizing
four EL34 tubes in the output stage and a 12AX7 tube preamp section, composed of
two 6SN7 tubes as drivers, and a Triode / Pentode mode selector switch.
TTA-500 uses audiophile-grade coupling capacitors: Wima for input and connecting
driver tubes with the output amp, and Rubycon capacitors in the power ltering.
The amplier sounds in a very warm, lifelike way and high dynamics.
The sound is very linear with almost no negative feedback.
High-quality EI broadband sound output transformer provides voltage stability and
constant and immediately-available energy at any volume level.
The both channels use independent rectier and lter circuits in the supply power.
The sound is natural and fresh with deep multidimensional soundstage.
The audiophile grade ALPS volume potentiometer ensures minimal noises and
channels crosstalk and has excellent operational feel and limits errors between the two
channels.
The high-end class, gold-plated speaker terminals oer almost lossless audio signal
transmission to speakers.
Analog inputs with high-end solid machined brass RCA sockets can accommodate up
to 3 stereo devices.
The preamplier input (HT input) is dedicated for using the TTA-500 as a tube power
amplier and allows to connect it to your Home Theatre system (AV receiver or amp)
to drive front left and right channels - now you can use the same pair of speakers in
your high-end stereo as well as in the multichannel system without switching speaker
cables nor changing the amplier.
The removable IEC power cable gives you an option to upgrade your system with a
premium audiophile power cable in any time.
The TTA-500 amplier does not only sound great but it also looks magnicently. The
front and side walls of the housing are made of thick 6 mm aluminum. The vacuum
tube decorative panel is nished in a modern brushed aluminum color.
Enjoy the analog sound at its best – Enjoy the TTA-500!
Cleaning
Do not use strong or abrasive cleaners. Use a dry, soft cloth for cleaning.
Specications
Full technical specications are available on the www.TagaHarmony.com website.
3
Contents
Safety Instructions 4
Important Safety Instructions 5
Controls and Displays 6
Remote Controller
Front and Rear Panel
Top Tube Panel
Hooking Up Speaker Cables 9
Hooking Up The Amplier 9
Operation 11
Additional Information 12
Specications 13
Produktspezifikationen
| Marke: | Taga Harmony |
| Kategorie: | Nicht kategorisiert |
| Modell: | TTA-500 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Taga Harmony TTA-500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Taga Harmony
9 August 2025
8 August 2025
8 August 2025
8 August 2025
8 August 2025
8 August 2025
8 August 2025
8 August 2025
8 August 2025
8 August 2025
Bedienungsanleitung Nicht kategorisiert
- Husky
- Steelplay
- Karibu
- ENS
- Synthesis Technology
- Easyrig
- Fein
- Speco Technologies
- Aurora
- Tecnoinox
- MRP
- Besco
- Hämmerli
- Craftsman
- Quadrios
Neueste Bedienungsanleitung für -Kategorien-
21 August 2025
21 August 2025
21 August 2025
21 August 2025
21 August 2025
21 August 2025
21 August 2025
21 August 2025
21 August 2025
21 August 2025