Tanita D-1000 Bedienungsanleitung

Lies die bedienungsanleitung für Tanita D-1000 (3 Seiten) kostenlos online; sie gehört zur Kategorie Waage. Dieses Handbuch wurde von 48 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 24.5 Bewertungen. Hast du eine Frage zu Tanita D-1000 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

4

Using TANITA Wireless Remote Tabletop Display

Initial Setting

Please make sure the scale is within 17feet (5m) with batteries inserted.

Insert batteries into the remote display.

Press any front panel button to start the communication process.

The wireless icon () on the display will blink while the remote display communicates

with the platform. After the communication is successfully done (wireless icon

disappears), continue to step 1 “Set Hour”.

Note: If the communication fails, the display will show "ErrC", press any front panel

button to restart the communication process.

1. Set Hour

Press /to set hour and then press SET.

The unit will beep once to confirm.

2. Set Minute

Press /to set minute and then press SET.

The unit will beep twice to confirm the programming.

• Resetting time

Press the clock button on the bottom of the remote display.

Then follow the procedure 1 and 2.

Setting and storing personal data in memory

You will receive readings only if data has been programmed into the Tanita Remote Tabletop Display.

1. Select Personal Data Number

Use the SET button to activate the unit. Use / buttons to select a personal data number. Press SET.

2. Set Age

Use / buttons to select age. Press SET.

3. Select Female or Male

Use / buttons to select Female () / Male () / Athlete Female (/) / Athlete Male (/). Press SET.

4. Specify Height

Use / buttons to select height. Press SET.

5. Select Activity Level (Except D-1100)

Use the / buttons to specify Activity Level. Press the SET button to confirm

The remote display will beep twice and the display will flash all data three times to confirm the programming.

The power will then shut down automatically.

To use the DCI (Daily Calorie Intake) feature properly, you need to set the Activity Level.

Level 1 = Inactive lifestyles (little or no exercise)

Level 2 = Moderately active lifestyles (occasional, low intensity exercise)

Level 3 = Adult involved in intense physical activity

Note: If you select the Athlete Mode, it will automatically set the Activity Level to Level 3.

Switching The Weight Mode

Select your preferred weight mode using the weight mode switch on the bottom of the Remote Display.

Battery Cover

Backlight Button

Upright Position

Produktspezifikationen