Techly ICA-TB TPM-3 Bedienungsanleitung

Techly Büros ICA-TB TPM-3

Lies die bedienungsanleitung für Techly ICA-TB TPM-3 (8 Seiten) kostenlos online; sie gehört zur Kategorie Büros. Dieses Handbuch wurde von 49 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 25 Bewertungen. Hast du eine Frage zu Techly ICA-TB TPM-3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/8
ASSEMBLY INSTRUCTIONS
Mobile Stand
Up Workstation
min810mm-max1250mm
HOW TO ADJUST HEIGHT
Worktable can be adjusted to the
desired height by pulling up, until you
hear sound "KA" from both legs of
worktable. Then the worktable is fixed
on this height.
HOW TO LOWER HEIGHT
Pull up worktable directly to the top, until
you see mark "down" on the leg of
worktable, then lower it slowly to the
most bottom, until you hear sound "KA"
from both legs of worktable. Then pull up
to the right height.
NOTE:
1.Loosen the knobs to adjust the
worktable to the desired height , then
tighten the knobs to secure.
2.Please do not put anything on the
worktable when adjusting the worktable
height.
3.Make sure both legs of worktable are
at same height while finished height
adjustment.
4.Make sure you hear sound "KA" while
you adjust worktable to your desired
height. This means the worktable is
fixed at the height; If without this sound,
it means the worktable is not fixed at this
height.
5."MAX" mark on the leg means the max
height which worktable can be fixed.


Produktspezifikationen

Marke: Techly
Kategorie: Büros
Modell: ICA-TB TPM-3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Techly ICA-TB TPM-3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten