Tenda SG04E Bedienungsanleitung


Lies die bedienungsanleitung für Tenda SG04E (14 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Tenda SG04E oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/14
4GE PoE xPON ONU
SG04E
Installation Guide
Scan the QR code or visit www.tendacn.com for
installation videos, technical specifications and more
information.
You can see the product name and model on the
product label. The label can be found on the bottom
of the device.
ONU × 1
Power adapter × 1 Quick installation guide × 1
- 1 -
Package Contents
- 2 -
1. Install the ONU
Preparations
NOTE
Desktop mounting: ESD bracelet or gloves
Wall mounting: ESD bracelet or gloves, ladder, screwdriver, marker,
hammer drill, rubber hammer, spirit level, 2 screws (self-prepared, thread
diameter: 3 mm, length: 14 mm, head diameter: 5.2 mm), 2 plastic
anchors (self-prepared, height: 6.6 mm, inner diameter: 2.4 mm, length:
26.4 mm)
Desktop Mounting
Horizontally place the ONU right-side up on a big enough, clean, stable
and flat desktop.
Wall Mounting
Mark your wall for the wall-mounting slots on the bottom of the ONU
(distance between two holes: 80 mm) and drill two holes (diameter: 6
mm) horizontally.
➋ Hammer plastic anchors into the holes.
Insert screws into the plastic anchors, leaving a gap (at least 2.5 mm)
between the screw heads and plastic anchors.
Place the ONU on the screws and slide it down until it locks into place.
− The ONU can only be installed on non-flammable walls, such as a concrete wall.
− Do NOT install the ONU with air vents facing downward. Otherwise, there will be potential safety
hazards.


Produktspezifikationen

Marke: Tenda
Kategorie: Nicht kategorisiert
Modell: SG04E

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tenda SG04E benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten