Thames & Kosmos Spy Labs: Cryptic Puzzle Safe Bedienungsanleitung

Lies die bedienungsanleitung für Thames & Kosmos Spy Labs: Cryptic Puzzle Safe (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 5 Bewertungen. Hast du eine Frage zu Thames & Kosmos Spy Labs: Cryptic Puzzle Safe oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Bewegungs-

melder mit vier

Fangleinen

Safeguard your secrets and treasures inside of this

portable vault! The secret compartment will only open

after the correct six-digit combination is entered. You set

the code. With your Spy Labs Cryptic Puzzle Safe, rest

assured that important belongings like crucial evidence,

secret messages, and even your allowance aren’t at risk

of falling into the wrong hands!

WARNING! Not suitable for children under 3 years. Choking hazard — small parts

may be swallowed or inhaled.

Keep the packaging and instructions as they contain important information.

The puzzle safe should never be forced open! Keep the emergency key

somewhere safe, or ask your parents or another adult to keep it for you.

1 Locking cap

2 Outer tube with slot and end piece

3 Inner tube with protruding pins

4 Smooth ring (6x)

5 Toothed ring (6x)

6 Emergency key

7 Number strips (6x)

Image 4

Image 1

Image 2

Image 3

Cryptic Puzzle Safe

Crack the code

and open the

secret compartment

inside

1. Open the puzzle safe using the emergency key

Insert the emergency key into the two square holes in the locking cap. Hold the

body of the puzzle safe with one hand and slowly but forcefully slide off the cap with

your other hand, keeping the emergency key pushed firmly into the holes.

3. Change the access code

You have two options for changing the access code: You can either slide the six

rings back onto the outer tube in reverse order (see step 4) or change the

positions of the number strips inside the rings.

Look closely at one of the rings. It consists of three pieces: a number strip, a

smooth ring, and a toothed ring. Each number strip is held in place on a smooth

ring by a toothed ring. There is a gap on the inside of the smooth ring for the pins

on the inner tube to slide through later. The gap on the inside lines up with the

number from the correct code on the outside. Disassemble the ring assembly (see

image 3) by pulling both halves apart.

Once you have decided what you want the

six-digit access code to be, adjust the number

strip on the ring so that the first number of the

desired code is over the gap on the inside. (In

image 3, for example, the number is 5.) Make

sure that the tabs on the number strip are in

the holes on the side of the smooth ring. Once

you are happy with the positioning, place the

toothed ring over the number strip and

smooth ring, lining up the notch in the toothed

ring with the notch in the smooth ring.

Repeat these steps for the five additional rings. Once complete, you have the rings

of your six-digit access code.

4. Reassemble the safe

Slide the inner tube with the pins into the locking cap. The two locking tabs at the

end of the inner tube must engage. You will hear a click when the cap locks in place.

Slide the rings onto the outer tube in the order of your access code. In addition to

memorizing it, be sure to write down the combination and put it somewhere safe,

just in case. If you ever forget or misplace the access code, you can use the

emergency key to open the puzzle safe.

Align the rings on the outer tube so that the solution numbers are in a straight line

and line up with the arrow on the end piece. This is called the “solution row.”

Carefully push the inner tube into the outer tube (see image 4) and then twist the

rings to scramble the code.

5. Open the safe using the access code

To open the puzzle safe, you must turn the rings to show the correct code in the solution row. The arrows on both ends mark the solution row. Rotate the rings until all of

the correct numbers are lined up in the solution row. Once all of the correct numbers are lined up, you can pull apart the ends of the puzzle safe. You may need to jiggle the

rings a little while pulling.

Once your safe is open, you can change the access code at any time by changing the order of the rings or the positions of the number strips (see image 2). Place your

treasures and secrets inside the inner tube before resealing your safe. Because there are 1,000,000 possible solutions, you can rest assured that your items are safe!

2. Disassemble the safe

First, find the notch on the

inside of the first ring. Turn

the ring until the notch lines

up with the slot in the

outer tube (see image 2).

The first ring can now be

removed by sliding it over

the raised edge on the

outer tube. Pull hard to get it over

the raised edge. Repeat this process with all of the

remaining rings. Before you remove the last ring, pull the

inner tube (with the protruding pins) out of the outer tube.

Tip! When you disassemble the

puzzle safe, take note of each

piece and where it fits so you

know where it belongs when

you reassemble it.

Tip!

You can also turn the preprinted number strips over and create your own

rings by writing letters and numbers or drawing symbols on the back sides.

Whatever you write or draw onto the strip must always be visible in the windows

created by the teeth of the toothed rings.

You can download blank strips to print and cut out on the product page for this item

on www.thamesandkosmos.com.

Contents:

HOW TO SET THE CODE FOR YOUR CRYPTIC PUZZLE SAFE

7

6

4

5

3

2

1

(6x)

1. Push key in.

2. Slide cap off.

Produktspezifikationen