TOA D-911 Bedienungsanleitung

Lies die bedienungsanleitung für TOA D-911 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 36 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 6 Bewertungen. Hast du eine Frage zu TOA D-911 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Thank you for purchasing TOA's D-911 VCA Fader unit.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

D-911D-911 VCA FADER UNIT

INSTRUCTION MANUAL

1. GENERAL DESCRIPTION

The D-911 VCA Fader Unit is designed to be used in

conjunction with the D-901 Digital Mixer. Connecting to the

D-984VC VCA Control Module permits volume adjustment

of all the channels and contact controls of the D-901 Mixer.

2. HANDLING PRECAUTIONS

•The D-911 Fader Unit is connected to the VCA control

modules mounted in the D-901 Digital Mixer. Connect

each of eight terminals to

the D-984VC's terminal of

the same name by way of

the fully-connected straight

cable as shown on the

right.

•Use the D-901 firmware of version 3.0 or later. Firmware

versions earlier than it cannot be used in conjunction with

the fader unit.

The firmware version number can be confirmed on the D-

901's front panel-mounted display.

3. BLOCK DIAGRAM

[Connection]

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

1 81 8––

TOAD-901Series

Softw areVer3.00

[Display example]

VCA

IN CH 1-6

VCA

IN CH 7-12

VCA

OUT CH 1-4

VCA

OUT CH 5-8

CTRL

IN 1-4

CTRL

OUT 1-4

CTRL

IN 5-8

CTRL

OUT 5-8

16

DC

712

DC

14

DC

58

DC

DC

14

1 4

Make contact

5 8–

Same as above

4. SPECIFICATIONS

• Accessories

Fader knob (Red, Yellow)*............................ 3 each

Volume knob (Red)*.............................................. 2

Rack mounting screw ............................................. 4

Rack mounting fiber washer .................................. 4

Rack mounting bracket (preinstalled on the unit) ... 2

*Convenient for color coding to distinguish

channels to which stereo link or group

settings are assigned.

Note

The design and specifications are subject to

change without notice for improvement.

Power Supply 5 V DC (supplied from the optional D-984VC)

Connector RJ45 connector x 8

Input Fader ControlInput fader (100 mm) x 12

Output Volume ControlOutput volume control x 8

Contact ControlIlluminated switch x 8

Remote OutputNo-voltage make contact output

(contact capacity: 30 V DC, 4 A)

Remote SwitchSeesaw switch for activating the remote function of the

power distributor

FinishPanel: Pre-coated steel plate, black(30% glossy)

Dimensions 482.6 (w) x 177 (h) x 61.3 (d) mm

(excluding projection)

Weight 2.7 kg

If your firmware version is old, download the latest

software program and the "D901 PC software instruction

manual" from the TOA Internet product data site

[http://www.toa-products.com/]. For the update

procedure, refer to the instruction manual.

•For channels with stereo link or group settings

established at the D-901, the lowest numbered channels

in the stereo linked or grouped channels are enabled.

•Control's knob position 10 of the D-911 provides the

channel gain set by the D-901. As a guide, knob position

8 provides about 10 dB below the gain set by the D-901.

Produktspezifikationen