TOA MT-S0601 Bedienungsanleitung

Lies die bedienungsanleitung für TOA MT-S0601 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 15 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 8 Bewertungen. Hast du eine Frage zu TOA MT-S0601 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Indicates a potentially hazardous

situation which, if mishandled, could result in death or

serious personal injury.

Indicates a potentially hazardous

situation which, if mishandled, could result in moderate or

minor personal injury, and/or property damage.

Please follow the instructions in this manual to obtain the optimum results from this unit.

We also recommend that you keep this manual handy for future reference.

MT-S0601MATCHING TRANSFORMER

INSTRUCTION MANUAL

SAFETY PRECAUTIONS

GENERAL DESCRIPTION

INSTALLING THE MATCHING TRANSFORMER

•Be sure to read the instructions in this section carefully

before use.

•Make sure to observe the instructions in this manual as

the conventions of safety symbols and messages

regarded as very important precautions are included.

•We also recommend you keep this instruction manual

handy for future reference.

Safety Symbol and Message Conventions

Safety symbols and messages described below are used

in this manual to prevent bodily injury and property

damage which could result from mishandling. Before

operating your product, read this manual first so you are

thoroughly aware of the potential safety hazards as well as

understand the safety symbols and messages.

•Be sure to use this matching transformer only for the

specified speakers. If any other speaker is used, the

transformer could detach and fall, resulting in personal

injuries. Also, the transformer could generate heat,

causing a fire.

•When installing the matching transformer, consult the

shop from where it was purchased because installation

requires specialized skills and professional experience. If

the transformer should fall, it could result in personal

injuries.

•Avoid using an 83 tap when the speaker line of highΩ

impedance is a 100 V line. Otherwise, heat builds up in

the matching transformer, possibly causing a fire.

Blank Panel

Speaker

1. Remove four screws holding the blank panel to the

speaker and remove the panel.

2. Mount the matching transformer to

the back side of the blank panel.

(Use screws and nuts attached to

the blank panel.)

MT-S0601

WARNING

WARNING

CAUTION

CAUTION

The MT-S0601 matching transformer is designed to be installed in the speaker and used to convert the low-impedance

speaker into the high-impedance version.

Produktspezifikationen