TOA PJ-100W Bedienungsanleitung

Lies die bedienungsanleitung für TOA PJ-100W (2 Seiten) kostenlos online; sie gehört zur Kategorie Kontorstol. Dieses Handbuch wurde von 6 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 3.5 Bewertungen. Hast du eine Frage zu TOA PJ-100W oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Thank you for purchasing TOA's Projection Speakers.

Please carefully follow the instructions in this manual in order to ensure long, trouble-free use of your equipment.

1. SAFETY PRECAUTIONS

•Before installation or use, be sure to carefully read all the

instructions in this section for correct and safe operation.

•Be sure to follow all the precautionary instructions in this

section, which contain important warnings and/or

cautions regarding safety.

•After reading, keep this manual handy for future

reference.

PJ-100W, PJ-200WPROJECTION SPEAKERS

INSTRUCTION MANUAL

Factory-preset

values

Line Voltage

Imp.

50 V70 V100 V

250 Ω10 W

––

500 Ω5 W10 W

–

1 kΩ2.5 W5 W10 W

2 kΩ1.25 W2.5 W5 W

4 kΩ0.63 W1.25 W2.5 W

[PJ-100W]

[PJ-200W]

Cabinet

Cover

Speaker cable

Grommet B

Grommet A

Bracket

Screws

Detach the black input cable (HOT) and connect it to the

terminal of the desired input impedance/wattage according

to the tables below.

4. IMPEDANCE CHANGE

When changing impedance, follow the procedure below

after unscrewing and removing the cover.

•Install the speaker only in a location that can structurally

support the weight of the speaker and the mounting

bracket. Doing otherwise may result in the speaker falling

down and causing personal injury and/or property damage.

•Do not stand or sit on, nor hang down from the speaker

as this may cause it to drop, resulting in personal injury

and/or property damage.

•Do not operate the speaker for an extended period of

time with the sound distorting. This is an indication of a

malfunction, which in turn can cause heat to generate

and result in a fire.

2. GENERAL DESCRIPTION

The PJ-100W and PJ-200W Projection Speakers are

designed for indoor use. The built-in terminal board

provides an easy cable connection and allows bridge

wiring. Its wide frequency range makes it suitable for use

in both paging and BGM applications.

3. FEATURES

•Maximum input: 15 W (PJ-100W), 30 W (PJ-200W).

•Built-in transformer for 50 V, 70 V and 100 V speaker

line.

•Two grommets for parallel (bridge) connection.

WARNING

Indicates a potentially hazardous situation which,

if mishandled, could result in death or serious

personal injury.

CAUTION

Indicates a potentially hazardous situation which,

if mishandled, could result in moderate or minor

personal injury, and/or property damage.

Factory-preset

values

Line Voltage

Imp.

50 V70 V100 V

125 Ω20 W

––

250 Ω10 W20 W

–

500 Ω5 W10 W20 W

1 kΩ2.5 W5 W10 W

2 kΩ1.25 W2.5 W5 W

[Back side view of cover removed]

Grommet A

COM

Terminal board

Speaker cable

Cable clump A

Black input cable (HOT)

Note: The black input cable has been connected to the

terminal of 1 kΩimpedance for the PJ-100W and

500 Ωfor the PJ-200W.

Produktspezifikationen