Toolland FT101 Bedienungsanleitung
Toolland
Nicht kategorisiert
FT101
Lies die bedienungsanleitung für Toolland FT101 (25 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 9 Bewertungen. Hast du eine Frage zu Toolland FT101 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/25
FT101
EN
BLOW TORCH
NL
GASBRANDER
FR
BRÛLEUR AU GAZ
ES
SOPLETE DE GAS
DE
ANWÄRMBRENNER
PL
LAMPA LUTOWNICZA
PT
MAÇARICO
USER MANUAL 3
GEBRUIKERSHANDLEIDING 6
MODE D’EMPLOI 9
MANUAL DEL USUARIO 12
BEDIENUNGSANLEITUNG 15
INSTRUKCJA OBSŁUGI 18
MANUAL DO UTILIZADOR 21
FT101
V. 03 25/07/2017 2 ©Velleman nv –
FT101
V. 03 25/07/2017 3 ©Velleman nv –
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling. This device should be returned to your distributor or to
a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Toolland. Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
This device is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the device by a person responsible
for their safety.
Children shall be supervised to ensure that they do not play with the device.
Indoor use only. Keep this device away from rain, moisture, splashing and dripping
liquids. Never put objects filled with liquids on top of or close to the device.
Do not use near inflammable products or in explosive atmospheres. Heat can cause fire to
inflammable products even when they are not in sight. Only use in properly ventilated
rooms.
Incorrect use may cause fire.
Do not touch the shafts, tips, or hot air gun as this can cause serious burns. Keep the tips
and hot air away from the body, clothes, or other flammable material. Do not aim the
device at the eyes. Use gloves and/or heat-resistant tools to pick up the PCB assembly to
prevent burns. Always return the irons and gun to their stands between uses; always let
the device cool down after use and before storage.
Place the device on a level, stable, and fire resistant working surface.
Do not inhale solder fumes. The vapours that are released during soldering are harmful.
Therefore, you shall only use the soldering station in well-ventilated areas or under an
exhaust hood (solder fume extractor). Dispose of fume filters and solder residue in
accordance with local regulations.
Never use the device on live electronic circuits. Make sure power to the work piece is cut
and capacitors are discharged.
Do not block the device nozzle. This may cause heat reflection and may damage the
heating element.
Warning! Do not leave the device unattended when switched on.
Do not use the device if it is damaged or not working correctly.
In case of gas delivery problems, check if there is gas in the canister. If so, the problem could be resolved
by cleaning the injector.
Never put down the tip of the device if the flame is lit (keep the flame 10 cm away from objects).
Keep the tip of the device turned downwards (max 45°), away from persons and animals.
Immediately replace the hose if it shows abrasions, deterioration or any imperfection.
Avoid twisting or overheating the hose.
Warning! When closing the device, some gas may remain in the extension tube and the flame may keep
burning for a while.
Produktspezifikationen
| Marke: | Toolland |
| Kategorie: | Nicht kategorisiert |
| Modell: | FT101 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Toolland FT101 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Toolland
24 August 2024
16 August 2024
15 August 2024
15 August 2024
15 August 2024
13 August 2024
13 August 2024
12 August 2024
12 August 2024
10 August 2024
Bedienungsanleitung Nicht kategorisiert
- DMAX
- Zylight
- ELMEKO
- Conceptronic
- Siku
- Spring
- Amiko
- GAO
- Babylonia
- Nxg
- Dash
- Morel
- Blackmagic Design
- Megarevo
- Whelen
Neueste Bedienungsanleitung für -Kategorien-
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025