Toorx WBX-30 Bedienungsanleitung


Lies die bedienungsanleitung für Toorx WBX-30 (7 Seiten) kostenlos online; sie gehört zur Kategorie Heimtrainer. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 5 Bewertungen. Hast du eine Frage zu Toorx WBX-30 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/7
Ed : Rev :03/17 00
INSTRUCTION
Attach the Ajustment Knot (24) on the Sliding Block (06) and slide the Sliding Block (06) onto the center
of the Main Frame (01).
Attach the Rear Stabilizer (05) to the end of the Main Frame (01) and using one Hex Bolt (30) two Washers
(36) one Nylon Nut (34). Insert one Hex Bolt (32) and one Washer (36) up through the bottom holes.
Attach Front Stabilizer (03) to Front Upright (02), then slide Adjustment Foam Tube (11) to Front Upright
(02) and secure it in place with the Knob (26).Attah Front Upright (02) to the front end of Main Frame (01)
Attach the Rear Upright (04) to Main Fram as illustrated using one Hex Bolt (29),two Washers (35) and one
Nylon Nut (33),then insert one Lock Pin (28)
STEP 1
Attach the Seat Adjustment Bar (10) beams to the Seat Tube (09),at the same time attach the Seat Tube (09)
to the Maine Frame (01) as illustrated.Attch the Seat to Seat Tube (09) using four Hex Bolts (31) and four
Washers (36).
Aattach the Adjustment Bar (05) to the Sliding Block (06) by one Hex Bolt (30),two Washers (36) and one
Nylon Nut (34).Attach Backrest Tube (08) to Sliding Block (06) and Main Frame (01).Attach the Backrest
(14) to Backrest Tube (08) using four Hex Bolts (31) and four Washers (36).
STEP 2


Produktspezifikationen

Marke: Toorx
Kategorie: Heimtrainer
Modell: WBX-30

Brauchst du Hilfe?

Wenn Sie Hilfe mit Toorx WBX-30 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten