Topeak NINJA CO2 Bedienungsanleitung

Lies die bedienungsanleitung für Topeak NINJA CO2 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 5 Bewertungen. Hast du eine Frage zu Topeak NINJA CO2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

User's Guide

NINJA CO2

+

/ NINJA CO2

EN

HOW TO USE MICRO AIRBOOSTER

WARNING

• Accepts all 16g threaded CO cartridges.2

• Recommended to use Topeak 16g threaded CO cartridges.2

• Please read all instructions before first use.

• Periodically check that components are still securely

fastened to your bike.

• Compatible with Ninja Cage series.

• If using the Micro AirBooster inflator continuously, make sure to wait 20 seconds in between cartridges for the

rubber grommet inside the inflation head to return to its original position. Otherwise, a gas leak may occur and

prevent proper inflation.

• Tighten the CO

22 cartridge before using CO inflation function. Failure to do so will cause improper operation and

may cause injury.

• DO NOT remove CO

22 cartridge if it is still charged with gas. Completely discharge the CO cartridge before removal.

• When opening the CO

2 cartridge, point the inflator head away from yourself and others.

• DO NOT use Micro AirBooster Inflator if any part is cracked or broken.

• DO NOT expose the CO

2 cartridge to heat, or store at temperatures above 120˚F (49˚C), or store in enclosed vehicles.

• Make sure to wear gloves when inflating to avoid injury.

• The barrel and CO

2 cartridge may become extremely cold/ frosty when the CO gas is expelled. 2

• DO NOT try to unscrew the Micro AirBooster inflation head until it has warmed sufficiently to touch.

• Keep out of reach of children.

Presta Valve

Thread-in CO cartridge.Loosen valve core before inflation.2

12

Start and regulate CO flow by pushing 2

inflation head onto valve stem.

3

Install and thread-in inflation head

to Schrader valve.

Schrader Valve

Thread-in CO cartridge.Start and regulate CO flow by pushing 22

inflation head onto valve stem.

123

After each inflation, make sure

all CO

2

gas has been discharged

by pushing the Micro AirBooster

inflation head several times.

Micro AirBooster16g Topeak

Threaded CO 2

Cartridge x 2

CO Cartridge 2

Engagement

Inflation Head

To avoid possible personal

injury and damage to bike

and /or tool, ensure to

disengage CO inflator 2

properly after use by

unthreading inflation head

in correct direction.

NOTE

Tire Lever

NINJA CO2+NINJA CO2

YESNO

Produktspezifikationen