Tot Mate TM8350R Bedienungsanleitung
Tot Mate
Waschbecken
TM8350R
Lies die bedienungsanleitung für Tot Mate TM8350R (5 Seiten) kostenlos online; sie gehört zur Kategorie Waschbecken. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 14 Bewertungen. Hast du eine Frage zu Tot Mate TM8350R oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/5
1
#0964-3146
3594.TM8350/TM8352.9/25/18
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice.
CAUTION – CHOKING HAZARD
Adult assembly required due to presence
of small parts and sharp edges.
ATTENTION
Please unpack and assemble in an area away from children's activities. Remove all tools
and excess materials from work area after assembly of unit is complete. Dispose of pallet
and packaging materials in an environmentally friendly manner. If any parts are missing
or damaged, please call Stevens for immediate parts replacement (1-800-350-3270).
When ordering parts, give the Model Number and Color of the unit.
NOTE: ASSEMBLY INSTRUCTIONS REFERENCE
ILLUSTRATIONS AND PART NUMBERS FOR THE TM8352R.
by Stevens Industries, Inc.
704 West Main St.
Teutopolis, IL 62467
P: 800.350.3270
P: 217-857-7100 • F: 217-857-7101
www.totmate.com
TM8350R
TM8352R
IMPORTANT!
Assembly must be securely attached to
building structure with anchoring devices
of appropriate type, size and quantity in
accordance with applicable codes and
accepted installation practices.
TM8350R
Single Floor Vanity
TM8352R
Double Floor Vanity
3DUWV/LVW
3$5747<,7(0
;;
;;
;;
'(6&5,37,21
(QG8
$FFHVV3DQHO
5DLO7.6XSW
1XW3URSHOO[)ODQJ
6FUHZ0DFK3K7U=Q[
6FUHZ&RQQ+['F1LPP[PP
)DXF3((53/)/DY
6LQN6QJ&'(63:[:KW
3OE
J
6WUDLQHU)ODW'
3DUWV/LVW
3$5747<,7(0
;;
;;
;;
;;
'(6&5,37,21
(QG8
$FFHVV3DQHO
5DLO7.6XSW
5DLO;VXSW
1XW3URSHOO[)ODQJ
6FUHZ0DFK3K7U=Q[
6LQN'EO''(63:[:KW
)DXF3((53/)/DY
3OEJ6WUDLQHU)ODW'
6FUHZ&RQQ+['F1LPP[PP
6FUHZ&RQQ+[)O=1PP[PP
TM8350R – TM8352R
STEP-BY-STEP ASSEMBLY
2#0964-3146
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice. 3594.TM8350/TM8352.9/25/18
ILLUSTRATIONS AND PART NUMBERS ARE FOR TM8352R.
BASIC ASSEMBLY INSTRUCTIONS ARE THE SAME FOR BOTH MODELS.
2-PERSON ASSEMBLY RECOMMENDED.
IMPORTANT!
Be sure to keep all parts supported during assembly to avoid damage.
Do not over-tighten screws or it will damage the pre-drilled holes;
snug fit is adequate.
3DUWV/LVW
TM8352R
3$5747<,7(0
;;
;;
;;
;;
'(6&5,37,21
(QG8
$FFHVV3DQHO
5DLO7.6XSW
5DLO;VXSW
1XW3URSHOO[)ODQJ
6FUHZ0DFK3K7U=Q[
6LQN'EO''(63:[:KW
)DXF3((53/)/DY
3OEJ6WUDLQHU)ODW'
6FUHZ&RQQ+['F1LPP[PP
6FUHZ&RQQ+[)O=1PP[PP
HARDWARE / TOOLS INCLUDED
Hex Wrench
Access Panel Nut (5)
(Nut Propell 1/4 20x.5 5/8Flang)
Access Panel Screw (6)
(Screw Mach PhTr Zn 1/4-20x1.50)
Confirmat Bolt (10)
(Screw Conn HxDc Ni 7mmx50mm)
Flat Head Confirmat Bolt (11)
(Screw Conn HxFl ZN 7mmx50mm)
(Phillips screwdriver and soft mallet required but not included.)
TM8350R – TM8352R
STEP-BY-STEP ASSEMBLY
3
#0964-3146
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice.3594.TM8350/TM8352.9/25/18
Construct two as follows:Rail Supports
a. Insert dowels on ends of one into X Rail (4)
holes in center of two . Make sure TK Rails (3)
holes in ends of align with thru-holes X Rail (4)
in . Press firmly into place. TK Rails (3)
b. Secure Rails (3 & 4) from together with (a.)
two , using the Flat Head Confirmat Bolts (11)
included .Hex Wrench
c. Repeat and to construct other (a.) (b.) Rail
Support.
STEP
1
FOR TM8352R ONLY (STEP 1):
thru-hole
Lay one flat on floor, with side having the End (1)
most holes facing up. NOTE: Holes are closer to
back edge and further from front edge.
STEP
2
FOR BOTH MODELS (STEPS 2-13):
back edge
front edge
Insert dowels on into holes on TK Rails (3) End
(1). (For TM8352R, TK Rails (3) are part of the
Rail Supports Step 1 from .) Top edges of all TK
Rails (3) must be facing same direction. Press
firmly into place.
STEP
3
top edges of
TK Rails (3)
(to identify, note
location of holes
on faces)
Position other on top of assembly, so End (1)
dowels on align with holes on TK Rails (3) End (1)
and back edges of both are facing same Ends (1)
direction. Press firmly into place.
STEP
4
back edge
back edge
Produktspezifikationen
| Marke: | Tot Mate |
| Kategorie: | Waschbecken |
| Modell: | TM8350R |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Tot Mate TM8350R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Waschbecken Tot Mate
25 August 2024
25 August 2024
25 August 2024
Bedienungsanleitung Waschbecken
- Vigo
- CDA
- Leisure
- Nodor
- Teka
- Rohl
- Concept
- Signature Hardware
- Laveo
- Hotpoint-Ariston
- Advance Tabco
- Schock
- Foster
- BLANCO
- Dxv
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
12 Oktober 2024
11 Oktober 2024
11 Oktober 2024