TP-Link LiteWave LS109P Bedienungsanleitung

Lies die bedienungsanleitung für TP-Link LiteWave LS109P (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 7 Bewertungen. Hast du eine Frage zu TP-Link LiteWave LS109P oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Connection

Note:For simplicity, we will take LS106LP for example throughout this Guide.

Note:

1.PoE ports can also connect to non-PoE devices, but only transmit data.

2. LS105LP/ LS106LP can supply up to 30 W for each PoE port and 41 W for all PoE ports.

3. LS109P can supply up to 30 W for each PoE port and 63 W for all PoE ports.

4. LS109P has an uplink port (RJ45 port), which typically connects to uplink devices like routers.

IP CameraAPIP Phone

Router

LAN PortWAN Port

Internet

PoE Ports (1-4)

PoE Devices

Switches Explanation

Isolation(For LS109P)

O: Ports can transmit data with each other.

On: The corresponding ports cannot transmit data with other downlink ports. They can transmit data

only with the uplink port.

Extend(For LS105LP/LS106LP/LS109P)

O: The corresponding ports run at 10/100 Mbps and support PoE power supply up to 100 m away.

On: The corresponding ports run at 10 Mbps and support PoE power supply up to 250 m away.

Recovery(For LS105LP/LS106LP/LS109P)

O: The PoE Auto Recovery function is disabled.

On: The switch will constantly detect the working status of a PoE powered device (PD). When the switch

nds that the PD works abnormally, the switch will reboot it.

Note: The numbers in brackets indicate the ports where the feature takes eect. For example, when Extend (Port 1-4) is toggled to On, the Extend mode will be enabled for ports 1-4.

© 2024 TP-Link 7106510934 REV1.2.0

LED Explanation

Power

PoE Status

On: Providing PoE power

Flashing: Current-overload/Short-circuit

O: Not providing PoE power

On: Power on

O: Power o

Link/Act; Uplink

On:

Running at 10/100 Mbps, but no activity.

Flashing:

Running at Mbps and is transmitting 10/100

or receiving data.

O:

No device is linked to the corresponding port.

PoE Max

For LS105LP/LS106LP:

On: 34 W≤Total power supply < 41 W

Flashing: Total power supply ≥ 41 W

O: Total power supply < 34 W

Installation Guide

10/100Mbps Desktop PoE+ Switch

LS105LP/LS106LP/LS109P

Power Adapter

Ethernet Ports (1-6)

For LS109P:

On: 56 W≤Total power supply < 63 W

Flashing: Total power supply ≥ 63 W

O: Total power supply < 56 W

Produktspezifikationen