Tripp Lite B203-101-PNP Bedienungsanleitung

Lies die bedienungsanleitung für Tripp Lite B203-101-PNP (2 Seiten) kostenlos online; sie gehört zur Kategorie AV extender. Dieses Handbuch wurde von 30 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 8 Bewertungen. Hast du eine Frage zu Tripp Lite B203-101-PNP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Owner’s Manual

Product Features

Package Includes

Optional Accessories

Installation

USB 2.0 Over Cat5 Plug-and-Play Extender Kit

Model: B203-101-PNP

4-Port USB 2.0 Over Cat5 Plug-and-Play Extender Hub

Model: B203-104-PNP

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Copyright © 2014 Tripp Lite. All rights reserved.

PROTECT YOUR INVESTMENT!

Register your product for quicker service and ultimate peace of mind.

You could also win an ISOBAR6ULTRA surge protector—a $50 value!

www.tripplite.com/warranty

• B203-101-PNP extends a USB 2.0 signal up to 164 ft. (50 m)

from the source

• The B203-104-PNP allows you to connect four USB 2.0 devices up

to 164 ft. (50 m) from the source

• Supports USB 2.0 data transfer rates up to 480Mbps

• Backward compatible with USB 1.1

• Plug-and-Play; no software or drivers required

• Compatible with all major operating systems

• B203-101-PNP or B203-104-PNP Transmitter

• B203-101-PNP or B203-104-PNP Receiver

• External Power Supply

(Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)

• Owner’s Manual

• N202-Series Cat6 Snagless Patch Cables

• U022-Series USB 2.0 Cables

• UR022-Series Reversible USB 2.0 Cables

• U030-Series USB 2.0 5-Pin Mini B Cables

• UR030-Series Reversible USB 2.0 5-Pin Mini B Cables

• U050-Series USB 2.0 Micro B Cables

• UR050-Series Reversible USB 2.0 Micro B Cables

Note: Test to make sure that the entire installation works properly before pulling cables through ceilings or walls.

1. Connect the built-in USB cable on the transmitter unit to an available USB port on your computer.

2. Connect the RJ45 ports on the transmitter and receiver units with Cat5e/6 cable.

Note: The distance between the transmitter and receiver units must be no longer than 164 ft. (50 m).

3. Connect the external power supply to the receiver unit and plug it into a Tripp Lite Surge Protector, Uninterruptible Power Supply (UPS), or

Power Distribution Unit (PDU).

4. Connect a USB 2.0 device to each available port on the receiver unit.

Produktspezifikationen