Tripp Lite N252A-024-HUSHK Bedienungsanleitung


Lies die bedienungsanleitung für Tripp Lite N252A-024-HUSHK (29 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 7 Bewertungen. Hast du eine Frage zu Tripp Lite N252A-024-HUSHK oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/29
Installation Guide
24-Port Cat6a Dual IDC STP
High-Density 0.5U Patch Panel
Model: N252A-024-HUSHK
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
tripplite.com/warranty
Español 9 • Français 16 • Русский 23
2
Installation
1 Prepare Cables.
S/FTP Cable
F/FTP Cable
5 cm
5 cm
Remove approximately
5 cm of cable sheath.
Roll the exposed braid back
along the cable sheath.
Remove approximately
5 cm of cable sheath.
Roll the exposed foil back
along the cable sheath.
Where a foil screen is present,
remove approximately 2 mm of
the exposed length.
Where a foil screen is present,
remove approximately 2 mm of
the exposed length.
Separate the
conductors.
Wrap the drain wire at least
twice around the foil. Separate
the conductors.
50 mm
50 mm
2 mm
2 mm
Drain
Wire
3
Installation
2 Seat each wire into the IDC slots according to
the color scheme map. Punch down with a proper
impact tool.
OR


Produktspezifikationen

Marke: Tripp Lite
Kategorie: Nicht kategorisiert
Modell: N252A-024-HUSHK

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite N252A-024-HUSHK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten