Tripp Lite N286-01GSX-MDLC Bedienungsanleitung

Lies die bedienungsanleitung für Tripp Lite N286-01GSX-MDLC (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 3 Bewertungen. Hast du eine Frage zu Tripp Lite N286-01GSX-MDLC oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Quick Start Guide

Product Features

Package Includes

Optional Accessories

Installation

Cisco Compatible 1000Base-SX SFP Transceiver

with DDM, MMF, 850nm, 550M, LC

Model: N286-01GSX-MDLC

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Copyright © 2014 Tripp Lite. All rights reserved.

PROTECT YOUR INVESTMENT!

Register your product for quicker service and ultimate peace of mind.

You could also win an ISOBAR6ULTRA surge protector—a $50 value!

www.tripplite.com/warranty

• 1000Base-SX transceiver supports data transfer rates up to

1.25Gbps

• Compliant with SFP Multi-Source Agreement (MSA) and SFF-8472

with duplex LC receptacle

• Supports Digital Diagnostic Monitoring (DDM)

• 550 m transmission distance using 50/125 MMF cabling

• 300 m transmission distance using 62.5/125 MMF cabling

• Cisco switch compatible

• Hot-pluggable

• N286-01GSX-MDLC

• Quick Start Guide

• N320-Series Duplex Multimode 62.5/125 LC Fiber Cables

• N520-Series Duplex Multimode 50/125 LC Fiber Cables

• P999-000 Anti-Static Wrist Strap

Note:

• SFP transceiver modules are static sensitive devices that require proper handling. An Anti-Static ESD Wrist Strap or similar device should always be used when

handling a transceiver module.

• The transceiver module should never be installed with cables already connected. Always remove cables prior to installation to avoid damaging the cable, cable

connectors, and/or optical interface.

• Installing and uninstalling the transceiver module numerous times will shorten its useful lifespan. Do not uninstall and reinstall the module more than is

absolutely necessary.

1. Remove the transceiver module from its packaging, leaving the dust plugs inserted in the LC optical bores.

2. Gently insert the transceiver module into the module socket of your device, pressing on the dust plugs until it locks into place.

3. Verify that the transceiver module is locked into place by trying to remove it from the module socket without releasing the latch. If it stays in

place, it is seated properly. If not, you will need to re-insert it, firmly pressing on the dust plugs until it locks into place.

4. Once you have verified that the transceiver module is securely locked in place, you can remove the dust plugs from the LC optical bores and

connect your cabling.

Note: Save the dust plugs so that they can be used in the event that the transceiver module needs to be uninstalled and reinstalled.

Produktspezifikationen